Project

General

Profile

Actions

New Model #6957

open

UV-S9

Added by David Billcheck over 5 years ago. Updated about 3 years ago.

Status:
Feedback
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
07/31/2019
Due date:
% Done:

0%

Estimated time:
Equipment Loan/Gift Offered:
No
I read the instructions above:

Description

Can we get a dedicated model for the BAOFENG UV-S9.
Can download as a RADIODDITY 5RX3 for programming the 220 band, but
the freq spread is all in the VHF tab. eg VHF 130-260
would be nice to have 220-260 in its own section, and maybe
any other items specific to the UV-S9

Actions #1

Updated by David Billcheck over 5 years ago

Also no separate section for squelch adjustments for 220 freq's
Downloads and uploads O.K as a UV5R, but need the 1.25meter
band spread and squelch set areas.

Actions #2

Updated by David Billcheck about 3 years ago

Wondering if there will be any movement on this.

Actions #3

Updated by Jim Unroe about 3 years ago

  • Status changed from New to Feedback

David Billcheck wrote:

Also no separate section for squelch adjustments for 220 freq's
Downloads and uploads O.K as a UV5R, but need the 1.25meter
band spread and squelch set areas.

That is how Baofeng has implement the 3 bands in their UV-5R like tri-band radios. It is hardware limitation and CHIRP can't change that.

If you want a Baofeng like tri-band radio which has separate band limits and squelch thresholds for each band, then you will have to get a BTech UV-5X3 from Baofeng tech which implements it this way.

Jim KC9HI

Actions #4

Updated by David Billcheck about 3 years ago

Thanks Jim. Didn't know it was a hardware thing.

Actions #5

Updated by Bernhard Hailer about 3 years ago

I believe we could close this ticket? Thanks.

Actions

Also available in: Atom PDF