Project

General

Profile

Actions

Feature #75

closed

Add bank support for VX5

Added by Tom Hayward over 12 years ago. Updated almost 12 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
03/13/2012
Due date:
% Done:

100%

Estimated time:
Chirp Version:
daily
Model affected:
vx5
I read the instructions above:

Description

I am going to attempt to add bank support to chirp's VX5 driver.


Related issues 1 (0 open1 closed)

Related to Bug #415: bank register bit not set to enable bank mode in radio(related to bug 409)Closed01/08/2013

Actions
Actions #1

Updated by Dan Smith over 12 years ago

  • Status changed from New to In Progress
  • Target version set to 0.3.0

Targeting this for 0.3.0 since this is a feature

Actions #2

Updated by Tom Hayward over 12 years ago

  • % Done changed from 0 to 90

I have this mostly working, except for one thing. I can add and remove channels from banks successfully. If I add memories to banks and upload to a radio that has never used memory groups before, the memory groups cannot be recalled. Using the radio to add another channel to a group works, and after that all the programmed banks can be recalled. It seems like there is a bit somewhere responsible for "memory group feature enabled", but I haven't been able to find it.

Actions #3

Updated by Tom Hayward almost 12 years ago

  • Status changed from In Progress to Closed
  • % Done changed from 90 to 100
Actions

Also available in: Atom PDF