CHIRP

I am running CHIRP daily-20200107 on Ubuntu and attempting to program an Alinco DR-135T Mkiii using a bluemax49ers' FTDI USB programming cable plugged into the front data port of the radio. However, despite trying several different methods, I always get the same error: No Response from Radio. I have tried the download from the radio with three different start conditions, and I only see a response on the radio screen in one of the three modes. In the debug logs for all three start conditions, there is just a blank response from the radio.

1.) Radio in normal operating mode - debug.log.radio_not_in_clone_mode
No change in radio screen after attempt

2.) Radio in clone "send" mode, as indicated in the radio manual - debug.log.radio_in_clone_send_mode
Radio screen reads "SD 000" before and after attempt to download from the radio

3.) Radio in clone mode - debug.log.radio_in_clone_mode
Radio screen reads "CLONE" before the attempt, and reads "RD 000" after the attempt, which indicates that there was SOME response to the commands send over the serial connection.

Any help/ideas on what might be the problem would be greatly appreciated!

Thanks,
Brian
KI7MDF