Bug #7633
closed
Cloning from computer to radio Icom IC-2730a
Added by philip willer about 4 years ago.
Updated about 4 years ago.
Model affected:
Icom IC-2730A
I read the instructions above:
Description
Hello. I am working on helping someone with programming his Icom 2730A from computer to radio. What speaker port do you plug the connection in on the radio? Also what is the process to accept the clone from the computer to the radio. Is there a menu function? Button function to get this done. Help with this would be a great help. Got all the frequencies programmed in chirp just need to get them from the computer to radio with the how to do this. Thank you for the help in advance
- Tracker changed from Feature to Bug
- Subject changed from Cloning from computer to radio Icom 2730a to Cloning from computer to radio Icom IC-2730a
- Status changed from New to Feedback
- Target version set to chirp-legacy
- Model affected changed from icom 2730A to Icom IC-2730A
- Platform set to Windows
You should be able to find out where to plug in your programming cable in the radio's manual, which you can find here: [[[https://www.icomjapan.com/support/?SWT=&ID=20141216001&GNR=Amateur&TYPE=Mobile&PDNM=IC-2730A/IC-2730E&INQWORDSWT=No&INQWORD=]]]. It should also explain how to clone between radios, if this radio supports it.
As for using Chirp, you could proceed as follows:
1) Save (export) your programmed frequencies in Chirp as CSV file.
2) Download an image from your IC-2730A.
3) Import the CSV file you saved in step 1). The data will be added to your downloaded image.
4) Upload the result into your IC-2730A.
Good luck!
- Status changed from Feedback to Closed
No more traffic on this ticket.
Also available in: Atom
PDF