Bug #8303
openKenwood TK-768 (N) "Error setting memory: Frequency requires 12.50kHz step"
0%
Description
I have Kenwood TK-768(N) and getting "Error setting memory: Frequency requires 12.50kHz step" when I go to program frequencies.
I was adding in some missing frequencies and come up with this problem. The radio supported 6'25kHz step value. Please assist.
**Using CHIRP because the Kenwood software(KPG-29D) only runs on DOS.
Updated by Steve Allen about 4 years ago
Please see my response in the Kenwood TK-862 error setting memory bug #8245. My fix is a bit of a kludge, but it seems to work well enough.
Updated by Jim Unroe about 4 years ago
- Status changed from New to Feedback
The list of supported step values are not included in this radio's driver. When they are not listed, CHIRP uses a default step list that does not include the 6.25 or 12.5 steps. Do you know what the supported step values are for this radio?
Jim KC9HI
Updated by Jim Unroe about 4 years ago
Please attache a CHIRP Radio Images (*.img) file that can be used to test with.
Thanks,
Jim KC9HI
Updated by Jim Unroe about 4 years ago
David and Steve,
Would either (or both) of you please download from your radio, save it as a native CHIRP Radio Images (*.img) file and attach it to this issue so I can run tests on my patch.
Jim KC9HI