CHIRP

I programmed about 30 channels manually but did not put it names. When I load the program it associates the name to the channel I manually programmed. However if I go to the second radio ( working with 2 new KG-UV9D MATTE) it will not take the channels and associate them. I only manually programmed 2 channels on the second radio to see if it will populate and it does not.

Looks like there's a firmware change which needs to be addressed.
If I understand you correctly, all goes fine, but the radio claims after upload that there are no channels currently in use?

Correct

I am having the same issue with my Wouxun KG-UV9D Plus.

I just bought a Wouxun KG-UV9D Mate. Just wondering what the ETA is on getting Chirp to work with it so I can program easier?

I was helping a friend who just got the KG-UV9D Mate. We figured out that if you program it with the latest version of CHIRP, you do indeed not get anything to show up on the radio. If you then download the Wouxun KG-UV9D-MATE Programming software directly from the manufacturer's website, and then read from the radio, you will see what was programmed by CHIRP in the Wouxun software. Then, just write back to the radio and the channels should now be usable. In my experience, reading from, and then immediately writing to the radio, it gave me errors/warnings that needed to be fixed, leading me to believe that CHIRP is simply programming values into fields that aren't supported by the radio. Hopefully this is helpful!

I had the same trouble, went into the radio manually and toggled the memory channels on, after that, the CHIRP programmed channels appear. I could not try the work around with the Wouxun software as I do not have a windows PC readily available.

Hope that helps

Garrett McLarty wrote:

I had the same trouble, went into the radio manually and toggled the memory channels on, after that, the CHIRP programmed channels appear. I could not try the work around with the Wouxun software as I do not have a windows PC readily available.

Hope that helps

Can you elaborate on how you turned the channels on?
Thanks!

Try the patch on issue 10532

https://chirp.danplanet.com/issues/10532