Bug #9247

FT-65E: "5 Beep" is not configured correctly

Added by Ferdinand Funker about 1 month ago. Updated 20 days ago.

Status:Closed Start date:07/29/2021
Priority:Normal Due date:
Assignee:Bernhard Hailer % Done:

100%

Category:-
Target version:chirp-daily
Chirp Version:daily Platform:All
Model affected:Yaesu FT-65E

Description

Hello,

I disabled the button beep with

Settings > Misc Settings > "Enable the Beeper: Off"

in "CHIRP". After uploading the image, the setting is always enabled. Is there any other information you need?

radio: FT-65E
CHIRP: daily-20210724

Yaesu_FT-65E_beep_off.img - Beep: OFF (8.5 kB) Ferdinand Funker, 08/15/2021 05:15 am

Yaesu_FT-65E_beep_key.img - Beep: KEY (8.5 kB) Ferdinand Funker, 08/15/2021 05:15 am

Yaesu_FT-65E_beep_key sc.img - Beep: KEY+SC (8.5 kB) Ferdinand Funker, 08/15/2021 05:15 am


Related issues

related to Bug #8287: FT-4XR beep menu options are reversed Closed 09/29/2020

Associated revisions

Revision 3562:c823f6066d0e
Added by Bernhard Hailer 20 days ago

Fix for FT4/25/65 menu item "Beep" values in wrong order - fixes #9247

History

Updated by Bernhard Hailer about 1 month ago

  • Status changed from New to Feedback
  • Assignee set to Bernhard Hailer
  • Target version set to chirp-daily
  • Model affected changed from FT-65E to Yaesu FT-65E

Does it go off when you configure Settings > Misc Settings > "Enable the Beeper: On"?

Seems to be related to #8287 (same driver). That one is marked resolved; however, the patch may not have reached the repository. Will have to look into.

Updated by Jim Unroe about 1 month ago

I would suggest that you attach 2 CHIRP Radio Images (*.img) file downloaded from your radio. The only difference being one image has Beep enabled (using the radio's menu system) and the other image has Beep disabled (again using the radio's menu system).

Jim KC9HI

Updated by Ferdinand Funker about 1 month ago

Jim Unroe wrote:

I would suggest that you attach 2 CHIRP Radio Images (*.img) file downloaded from your radio. The only difference being one image has Beep enabled (using the radio's menu system) and the other image has Beep disabled (again using the radio's menu system).

Jim KC9HI

Currently I've no data cable near me. I'm going to post an update, when I get hold of mine in the next couple of days

Updated by Ferdinand Funker about 1 month ago

There are three different options for "Beep" on the FT-65E:

  • OFF
  • KEY+SC
  • KEY

I uploaded an image for each of them.

Updated by Ferdinand Funker about 1 month ago

KEY: The beeper sounds when a keypad button is pressed.
KEY+SC: The beeper sounds when a keypad button is pressed, or when the receiver scanning stops.
OFF: The beeper does not sound.

Updated by Jim Unroe about 1 month ago

It would appear to me that the list is in the wrong order.

The are listed in the driver in the following order

OFF
KEY
KEY + SC

But according to the "images" they are listed in in memory in the reverse the order

KEY + SC (0x00)
KEY      (0x01)
OFF      (0x02)

So selecting BEEP + SC in CHIRP should set BEEP to OFF in your radio. Would you confirm this?

Jim KC9HI

Updated by Ferdinand Funker about 1 month ago

So selecting BEEP + SC in CHIRP should set BEEP to OFF in your radio. Would you confirm this?

Yes, this works. The beeper is disabled afterwards.

Updated by Jim Unroe about 1 month ago

Bernhard, it seem that the list for BEEP setting choices are reversed in the driver from of how they are stored in the FT-65E radio. Since I don't own any of the models that the "ft4.py" driver supports, I have no way of knowing if this bug is unique to the FT-65E or if it is reversed across-the-board. Are to able to test other models?

I also notices your name in the copyright area of the driver and you have been selected(volunteered?) as the "Assignee" for this issue. Do you want to work on this?

Jim KC9HI

Updated by Bernhard Hailer about 1 month ago

Yes, I finished the work started by Dan Clemmensen on this driver and can test on an FT-25R.
When there's some time, I can also fix the driver (it has been a while I worked on Chirp code).

Updated by Bernhard Hailer 20 days ago

  • % Done changed from 0 to 100
  • Platform changed from Linux to All

Patch submitted.

Updated by Bernhard Hailer 20 days ago

  • Status changed from Feedback to Resolved

Updated by Anonymous 20 days ago

  • Status changed from Resolved to Closed

Applied in changeset c823f6066d0e.

Also available in: Atom PDF