Project

General

Profile

Actions
Copy link

Bug #9717

open
« Previous | Next »

Baofeng BF-888S bricked after programming

Added by Mr. Znaya over 2 years ago. Updated 11 months ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
01/20/2022
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
(All models)
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Programming new frequencies with Chirp (Baofeng_BF-888_PMR446.img) results in an issue similar to the one described in #9497. Green light is always on, there is only static noise, no transmission and no reception. Changing the squelch value in settings does not have any impact. No errors were shown on the interface. Debug log is attached.

Uploading the saved original settings (Baofeng_BF-888_original.img) with Chirp and right after uploading settings and frequencies with 888S v1.0.5 results in issue similar to what is described in #8963. Transmission power seems to be very weak (I have no way to measure it), two radios only communicate with each other if they are very close (antennas almost touching).

Could it have been Chirp overwriting a wrong memory address?

Files

Download all files
Baofeng_BF-888_original.img (1.13 KB) Baofeng_BF-888_original.img File saved with Chirp before making any change Mr. Znaya, 01/20/2022 02:42 PM
Baofeng_BF-888_PMR446.img (1.14 KB) Baofeng_BF-888_PMR446.img File used in Chirp to change frequencies Mr. Znaya, 01/20/2022 02:42 PM
debug.log (48.1 KB) debug.log Debug log generated after uploading Baofeng_BF-888_PMR446.img Mr. Znaya, 01/20/2022 02:42 PM
pmr446.480 (4.05 KB) pmr446.480 File used in 888S v1.0.5 to change frequencies Mr. Znaya, 01/20/2022 02:42 PM
Baofeng_BF888_after_2019_repair.480 (4.05 KB) Baofeng_BF888_after_2019_repair.480 Mr. Znaya, 06/21/2023 09:16 AM
Actions
Copy link

Also available in: Atom PDF

Copyright 2023 CHIRP Software LLC