CHIRP

Just purchased an FT5DR yesterday and looked into moving all of my data from my Baofeng UV5R to it.

I noticed that Yaesu released AMDS-14 on their website for this radio, a utility to program the radio. But I can't get the USB to recognize. As the csv output from Chirp and this application differ, it's not an easy task to convert between them.
When I output the existing file from my radio, I get this (Minus the header, I added those. Hope this helps spur things along..

Channel No Priority CH Receive Frequency Transmit Frequency Offset Frequency Offset Direction Auto Mode Operating Mode Dig/ANALOG TAG Name Tone Mode CTCSS Frequency DCS Code DCS Polarity User CTCSS RX DG-ID TX DG-ID TX Power Skip Auto Step Step Memory Mask ATT S-Meter SQL Bell Narrow Clock Shift Bank1 Bank2 Bank3 Bank4 Bank5 Bank6 Bank7 Bank8 Bank9 Bank10 Bank11 Bank12 Bank13 Bank14 Bank15 Bank16 Bank17 Bank18 Bank18 Bank19 Bank20 Bank21 Bank22

1 ON 146.52 146.52 0 OFF ON FM FM ON 146.52 TONE 88.5 Hz 23 RX Normal TX Normal 1600 Hz RX 00 TX 00 High (5W) OFF ON 5.0KHz OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 0

Cong Niu wrote:

Yaesu has released the new successor of the FT3D, the FT5D.
The FT5D's MEMORY.dat and BACKUP.dat files won't open in Chirp when trying to set it to use the FT3D radio so Yaesu's changed something in the file. Would it be possible for someone to have a update on this new radio? Thanks a lot!

This is the original post it has the .dat files attached.
https://chirp.danplanet.com/issues/9365