Custom queries

All CHIRP-next Bugs
All CHIRP-next Feature Requests
All closed issues
All open issues
New Model Requests
Open bugs by Developer
Open bugs by Target Version
Potentially Stalled Bugs

Bug #9982

closed

Retevis RB26 Tone Error

Added by Doug Rehman over 2 years ago. Updated about 2 years ago.

Status:

Closed

Priority:

Normal

Assignee:

Jim Unroe

Category:

Target version:

chirp-legacy

Start date:

08/10/2022

Due date:

% Done:

100%

Estimated time:

Chirp Version:

daily

Model affected:

RB26 and others

Platform:

All

Debug Log:

I read the instructions above:

Description

CTCSS/DCS cannot be changed/set for channels 8-14 (the 467 MHZ low power/narrow frequencies).

I was able to change them using the browser, but not with the standard settings tab.

Files

Download all files

debug.log (58.3 KB) debug.log		Doug Rehman, 08/10/2022 07:42 PM
RB26 Error.JPG (85.3 KB) RB26 Error.JPG		Doug Rehman, 08/10/2022 07:42 PM
retevis_rb26_temp_fix.py (46.9 KB) retevis_rb26_temp_fix.py		Jim Unroe, 08/11/2022 02:32 AM
RB26 Error 2.JPG (92.4 KB) RB26 Error 2.JPG		Doug Rehman, 08/11/2022 02:46 AM
retevis_rb26_fix_b1.0.py (43 KB) retevis_rb26_fix_b1.0.py		Jim Unroe, 08/14/2022 12:55 AM
retevis_rb26_fix_b1.2.py (44.2 KB) retevis_rb26_fix_b1.2.py		Jim Unroe, 08/19/2022 01:22 AM

History
Notes
Property changes
Associated revisions

Actions

Copy link

Updated by Jim Unroe over 2 years ago

File retevis_rb26_temp_fix.py retevis_rb26_temp_fix.py added
Status changed from New to In Progress
Assignee set to Jim Unroe
Target version set to chirp-legacy
Model affected changed from (All models) to RB26 and others
Platform changed from Windows to All

I will be looking at this to come up with a permanent fix. In the meant time you can use the attached driver module as a temporary fix.

To use it do the following...

save the attached file (retevis_rb26_temp_fix.py) to a convenient location. Note: Do not right-click the link to download. Left-click the link, wait for the next page to load. Then left-click the download link near the top.¶

open CHIRP¶

enable Enable Developer Functions in the Help menu¶

click Load Module in the File menu¶

locate and load the file that was saved in step 1¶

CHIRP should now have a red background to indicate that it is running with an externally loaded driver module. This does not permanently change your CHIRP installation. Once you close CHIRP, the next time you open CHIRP you will have to load this test driver module to have access to it again.

Hopefully you will be able to make your changes with this temporary driver module. Let me know if you can't.

Jim KC9HI

Actions

Copy link

Updated by Doug Rehman over 2 years ago

File RB26 Error 2.JPG RB26 Error 2.JPG added

It works for CH9-14. It doesn't work for CH8 (467.5675)

Actions

Copy link

Updated by Jim Unroe over 2 years ago

Doug Rehman wrote:

It works for CH9-14. It doesn't work for CH8 (467.5675)

Interesting. I did my testing with CH8. No matter, I am still looking to create a permanent fix.

Also, a better solution than using the Developer's Browser would be to use the Memory Properties Editor to edit the CTCSS tones/DCS codes. After selecting the memory row(s) that you wish to edit (yes you can edit common parameters of multiple channels at the same time), either click the [Properties] button at the top of the Spreadsheet Style Memory Editor or right-click a highlighted memory row and choose Properties from the list that appears. This method appears to not be affected by the "bug".

Jim KC9HI

Actions

Copy link

Updated by Jim Unroe over 2 years ago

File retevis_rb26_fix_b1.0.py retevis_rb26_fix_b1.0.py added

After a lot of research and many hours of trial and error, I believe I have a workable solution for the troublesome "Validation" code. Please test and provide feedback. Thanks in advance.

These changes also affect Retevis, RB17A, RT21, RT29_UHF, RT29_VHF and RT76 radio models. CHIRP "images":https://chirp.danplanet.com/projects/chirp/repository/show/tests/images for these radio models are in the CHIRP "Repository":https://chirp.danplanet.com/projects/chirp/repository if you would like to test any of them.

As a part of this I also made changes so that High was the default power level on channels where High power is permitted. I will likely have to split these changes into a minimum of 2 patches for them to be accepted. I left them combined as a convenience for testing.

Jim KC9HI

Actions

Copy link

Updated by Doug Rehman over 2 years ago

CH8-14 are now programming properly.

On the other channels, there's an issue with certain mode/power combinations. In testing using the first four channels (alter settings>upload>download):

Original New Actual
FM/High NFM/Low NFM/High <<<<ERROR
FM/Low NFM/High NFM/Low <<<<ERROR
NFM/Low NFM/High NFM/Low <<<<ERROR
FM/Low FM/High FM/Low <<<<ERROR

Once I change a channel to Low, I can't change it back to High.

Actions

Copy link

Updated by Jim Unroe over 2 years ago

File retevis_rb26_fix_b1.1.py added

Good catch. I was just testing images and wasn't uploading to / downloading from the radio. I dug out my RB26 and I think I have resolved the issue. I have attached the update.

Jim KC9HI

Actions

Copy link

Updated by Jim Unroe over 2 years ago

File deleted (~~retevis_rb26_fix_b1.1.py~~)

Actions

Copy link

Updated by Jim Unroe over 2 years ago

The retevis_rb26_fix_b1.1.py beta file was removed because it still has a bug.

Jim KC9HI

Actions

Copy link

Updated by Jim Unroe over 2 years ago

File retevis_rb26_fix_b1.2.py retevis_rb26_fix_b1.2.py added

Hopefully this should do better. I have dug out my RT21, RB17A, RB26, RT76, RT29_UHF and RT29_VHF and tested each one.

Jim KC9HI

Actions

Copy link

#10

Updated by Doug Rehman over 2 years ago

Worked perfectly for me—thanks for your work!

An unrelated question please: I updated "New Model #4851" (TYT TH-8600) 10 days ago to inquire about the status and haven't seen any response. The original request was 5/30/2017 with multiple duplicate requests and offer of radios since. Is there any chance of it being supported?

Thanks,
Doug

Actions

Copy link

#11

Updated by Jim Unroe over 2 years ago

Doug Rehman wrote:

Worked perfectly for me—thanks for your work!

Thank your for the testing and feedback. It has been very valuable to me. I will try to get these changes submitted in the next few days.

An unrelated question please: I updated "New Model #4851" (TYT TH-8600) 10 days ago to inquire about the status and haven't seen any response. The original request was 5/30/2017 with multiple duplicate requests and offer of radios since. Is there any chance of it being supported?

Getting a radio supported requires the following...

a radio¶

a programming cable¶

the factory programming software¶

a volunteer developer that is willing to do the work¶

It would seem that one or more of the requirements are missing.

Jim KC9HI

Actions

Copy link

#12

Updated by Jim Unroe over 2 years ago

Status changed from In Progress to Resolved
% Done changed from 0 to 100

A patch has been submitted. Support will be in the next CHIRP daily build following acceptance.

Jim KC9HI

Actions

Copy link

#13

Updated by Anonymous about 2 years ago

Status changed from Resolved to Closed

Applied in changeset commit:af1890971f56.

Actions

Copy link

Also available in: Atom PDF

Project

General

Profile

CHIRP

Custom queries

Bug #9982

Retevis RB26 Tone Error

Updated by Jim Unroe over 2 years ago

save the attached file (retevis_rb26_temp_fix.py) to a convenient location. Note: Do not right-click the link to download. Left-click the link, wait for the next page to load. Then left-click the download link near the top.¶

open CHIRP¶

enable Enable Developer Functions in the Help menu¶

click Load Module in the File menu¶

locate and load the file that was saved in step 1¶

Updated by Doug Rehman over 2 years ago

Updated by Jim Unroe over 2 years ago

Updated by Jim Unroe over 2 years ago

Updated by Doug Rehman over 2 years ago

Updated by Jim Unroe over 2 years ago

Updated by Jim Unroe over 2 years ago

Updated by Jim Unroe over 2 years ago

Updated by Jim Unroe over 2 years ago

Updated by Doug Rehman over 2 years ago

Updated by Jim Unroe over 2 years ago

a radio¶

a programming cable¶

the factory programming software¶

a volunteer developer that is willing to do the work¶

Updated by Jim Unroe over 2 years ago

Updated by Anonymous about 2 years ago