Project

General

Profile

Actions

LoadingTestModules » History » Revision 7

« Previous | Revision 7/12 (diff) | Next »
Dan Smith, 03/07/2023 12:04 AM


How to load test modules

If a CHIRP developer tells you to load a module to test, follow these instructions.

  1. Launch CHIRP. Make sure you are running the latest CHIRP-next build. If not, upgrade and start over.
  2. Click Help in the menu bar and select Load module from issue
  3. Key in the Issue number which has the test module attached and click the [OK] button
  4. Select the driver module listed and click the [OK] button. If there are multiple modules attached, select the one the developer wants you to test, usually the latest/last one. Your CHIRP is now running with the test driver module loaded.
  5. Test and report back your results. Be sure to include a debug log per the instructions here.

Note: An externally loaded driver module like this does not permanently change your CHIRP installation in any way. Once you close CHIRP you will have to re-load the driver module in order to have the added fixes or features again.

Updated by Dan Smith about 1 year ago · 7 revisions