Actions
Bug #10198
closedReading from Yaesu FT-4XE hang with error
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
12/27/2022
Due date:
% Done:
100%
Estimated time:
Chirp Version:
daily
Model affected:
Yaesu FT-4XE
Platform:
Windows
I read the instructions above:
Description
Tested platform:
Ubuntu 22.04.1 LTS with chirp that install from "Ubuntu software" manager, daily 20221217
Win10 with lastest patches, 2 different machines, chirp daily 20221217 and one chirp version from 3/2022
All platform has similar behaviour and error messages
Cable: Yaesu SCU-59 (original USB version)
Radio: Yaesu FT-4XE, ser # 2J481xxx
Win10 machines has installed Yaesu own USB driver from yaesu.com product files page. Utility from same page work fine for both direction (read, write)
How to test/use:
- start app
- Radio > Download from Radio
- set proper cfg COM3 (same as hw manager view), Yaesu and model FT-4XE (try also XR, same result)
- check ok and select "next/ok" for following notes
- chirp start communicate to radio, as it shows "TX" and signal bar start going forward
- after while, it shows up attached error message.
Error messare is same in all platforms.
Files
| chirp_error2.PNG (15.8 KB) chirp_error2.PNG | port and radio select | ||
| chirp_error.PNG (16.5 KB) chirp_error.PNG | Error message | ||
| chirp_error3.PNG (32.7 KB) chirp_error3.PNG | usb-ser driver | ||
| chirp_log.txt (37.1 KB) chirp_log.txt | log | ||
| chirp_radio.JPG (122 KB) chirp_radio.JPG | Radio after sw start communication | ||
| ft4x_rd.txt (163 KB) ft4x_rd.txt | Successful read with Yaesu software | ||
| ft4x_wr.txt (197 KB) ft4x_wr.txt | Successful write with Yaesu software | ||
| ft4x_rd_chirp.txt (81.5 KB) ft4x_rd_chirp.txt | Failed attempt to read with Chirp |
Related issues
Actions