CHIRP

Thanks Bill, I think that worked well. Here's a test module to try which I hope will fix it.

That is so funny. I was playing with the last PY file from the previous problem, and made virtually the same changes you have in this one.

Editing worked well. I sent it to the radio and the mems I touched looked good on the radio. Splits were correct, and radio flashed the +- symbol denoting an odd split.

GUI interface question. If you copy a row, and the modify the base frequency, on the UHF side the duplex and offset get cleared if duplex is split.

On the VHF side when I tried it, it reset it to - .600

Not sure if this is working as designed or not.

Included debug log of my flailings.

We are very close to all set here.

Bill

I think what you're seeing is the automatic split calculation. If you have Radio->Enable Automatic Edits selected then when you change the frequency it will try to select the proper duplex and offset for your region's band plan. If you disable that in the menu then it should let you change the base frequency without disturbing the split and tx frequency.

Cool, so I'll queue this up for the next build but won't merge it right away to avoid generating a build just after we had one and for such a small change.

Thanks!

Applied in changeset github|684e0e5d1979e0c7ae7607deeb37b55d6b044e6a.