Project

General

Profile

Actions

Bug #10907

closed

FT-8100 support does not handle odd split

Added by William Curlew about 1 year ago. Updated about 1 year ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
10/21/2023
Due date:
% Done:

100%

Estimated time:
Chirp Version:
next
Model affected:
FT-8100
Platform:
Windows
Debug Log:
I read the instructions above:

Description

The FT-8100 supports odd splits within a band, say 145.800 with xmit on 146.000. This is not supported in the chirp driver as the duplex "split".

To help troubleshoot this If have:
Upgraded the latest CHIRP 20231021
Factory reset the radio
Added a "normal" repeater into vhf mem 1 (145.110 - .600, 144.510)
Added an odd split into vhf mem 2 (145.110 tx on 145.510)
added an odd split into vhf mem 3 (145.110 tx on 145.000)
Downloaded this to CHIRP and saved the image attached.
The screen displayed "split" as the duplex on both the odd-split channels.
mem 2 showed an offset of .400000
mem 3 showed an offset of .890000

I then uploaded this back to the radio, and it looked ok.

Uploaded image and debug log are attached.

Bill Curlew


Files

chirp_debug-3g0bq47j.txt (57.1 KB) chirp_debug-3g0bq47j.txt William Curlew, 10/21/2023 12:06 PM
Yaesu_FT-8100_20231021_odd_Splits.img (3.13 KB) Yaesu_FT-8100_20231021_odd_Splits.img William Curlew, 10/21/2023 12:08 PM
ft8100.py (8.98 KB) ft8100.py 409f0cf2 Dan Smith, 10/21/2023 09:05 PM
chirp_debug-1xtxnsii.txt (28 KB) chirp_debug-1xtxnsii.txt William Curlew, 10/21/2023 11:05 PM
Actions

Also available in: Atom PDF