Actions
Bug #11701
closedQYT KT-8900D - Slots C & D won't set...
Status:
Not a bug
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
11/24/2024
Due date:
% Done:
0%
Estimated time:
Chirp Version:
next
Model affected:
QYT KT8900D
Platform:
Windows
I read the instructions above:
Yes
Description
Hi Team,
In the QYT KT8900D chirp settings I've set:
- Basic Settings -> Transceiver multi-receive = A+B+C+D - this should mean that all 4 slots can be set to different channels/frequencies. It works when I set C+D to the channels I want using the dial, so I know these settings are valid in the radio itself.
- Work Mode Settings -> VFO/MR modes all set to "Channel" A+B+C+D
- Work Mode Settings -> MR A Channel = 100
- Work Mode Settings -> MR B Channel = 102
- Work Mode Settings -> MR C Channel = 98
- Work Mode Settings -> MR D Channel = 66
- Upload to the radio
- C and D are not showing as channels 98 & 66
- Using the right-hand knob, manually set C and D to channels 98 & 66
- Turn the radio off using the power switch and back on again (push and hold the left hand knob) - Radio remembers C+D correctly
- Power off the radio completely via the power supply
- Power on the radio via the power supply *Note: All these channels are programmed into the radio. See picture of radio showing that they work as expected, and of the radio on initial power supply turn on showing the differences.
Expected results:
On radio power on, A+B+C+D should display the channels set in items 3-6
Actual results:
On radio power on, Only A+B are on the correct channels, C+D display incorrect channels.
Files
| Incorrect_Channels_After_Power_On.jpg (476 KB) Incorrect_Channels_After_Power_On.jpg | After PSU turned off/turned on | ||
| Correct_Channels_Manually_Set.jpg (515 KB) Correct_Channels_Manually_Set.jpg | After Manual setting on radio | ||
| Basic_Settings.png (576 KB) Basic_Settings.png | Chirp Basic Settings | ||
| Work_Mode_Settings.png (757 KB) Work_Mode_Settings.png | Chirp Work Mode Settings |
Actions