Bug #1527
closedSending mode of PTT-ID (Off,Eot,Bot,Both) are not changeable, and not works in channel (memory) mode.
0%
Description
As mentioned previously in Bug #1213 (rejected?), this menu item PTT-ID (Menu Nr.19)is completely absent from the software (maybe have separate column in channel editor)
Your precious work is very appreciated! :-)
Steve from Hungary
Updated by Filippi Marco over 10 years ago
As Jim suggested in reply to other issue, PTT ID is supported.
You can access that setting with a right click on a channel, from context menu select edit and the last two field in editor form that will appear are PTT ID and PTT ID Code.
Are you using an old version?
74 de IZ3GME Marco
Updated by Istvan Fekete over 10 years ago
Hello Marco!
Little bit confused, but localized the problem.
- The columns are not displayed in editor (PTT ID, BCL, etc..) and are not selectable.
- The right clicked editor window DON'T show PTT-ID fields if the respective line is empty (New). Only after there is already stored in memory. Maybe in the next release, this will be corrected. But its works! Thank You!
Have a nice day!
Steve from Hungary
Updated by Istvan Fekete over 10 years ago
Hello!
...and one more thing to previous:
When i copy a line (between memory locations) with PTT-ID fields set, these are not transferred to new location.
With best wishes!
Steve
Updated by Jim Unroe over 10 years ago
I checked and this also happens for the Baofeng UV-B5 and Wouxun KG-UV6D. So it isn't limited to the UV-5R.
Istvan, this has nothing to do with this issue but is your radio a 144/220 MHz model?
Jim KC9HI
Updated by Istvan Fekete over 10 years ago
Hello Jim!
I have two UV-5Rs. All are new, 400-520MHz versions and one with BFS313, and other one has BFS311 firmware.
Ok. I understand, maybe in future will be patched! (it is not a normal behavior)
Regards:
Steve
Updated by Jim Unroe over 10 years ago
OK. The reason I asked was that you stated "UV-5R BFS312" as the "Model affected". My observation has been that ever since the BFB291 firmware has been released, EVEN firmware versions have been VHF/220 radios and ODD firmware versions have been VHF/UHF radios. I was just trying to make that that continues to be true.
Jim KC9HI
Updated by Istvan Fekete over 10 years ago
Yes Jim. You are right! It was my fault. The BFS312 statement as model affected, was my mistake. Sorry!
Updated by Filippi Marco over 10 years ago
- Status changed from New to Feedback
I've done some tests and can confirm that all model are affected by this 3 different problems:
- memory "extra" fields are not displayed in main editor (PTT ID, BCL, etc..) and are not selectable.
- The right clicked editor window don't show memory "extra" fields if the respective line is empty (New)
- Copy/paste does not transfer memory "extra" fields
I'll open specific issue for each in a while, please Istvan and Jim look for them.
I'll also close this one if you have nothing to add to the original subject.
73 de IZ3GME Marco
Updated by Filippi Marco over 10 years ago
- Status changed from Feedback to Closed