Project

General

Profile

Actions
Copy link

Bug #1705

closed

Mac upload to VX-8 problem

Added by Michael Ditmore almost 10 years ago. Updated about 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
06/19/2014
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Yaesu VX-8
Platform:
MacOS
Debug Log:
I read the instructions above:

Description

Some months ago, I downloaded and saved the memory from a previous Yaesu VX-8

Now contained in a file which CHIRP has no problem opening - data all looks correct - roughly 300 channels

However, I am now having problems uploading to my new VX-8

System is a new MacBook Pro running 10.9.3 with CHIRP 0.4.0 - GTK 2.24.10 - PyGTK 2.22.0 - Python 2.7.2

Kawamall FTDI USB cable - which appears to be fine (downloading works and Monitor sees the driver)

When trying to upload, get this message from CHIRP:

Failed to communicate with the radio: Radio did not ack block 1

The radio shows -ERROR- after having correctly been in the -WAIT- state

Apple USB Config:

USB-Serial Controller:

Product ID: 0x2303
Vendor ID: 0x067b (Prolific Technology, Inc.)
Version: 3.00
Speed: Up to 12 Mb/sec
Manufacturer: Prolific Technology Inc.
Location ID: 0x14200000 / 22
Current Available (mA): 500
Current Required (mA): 100

In Monitor:

ls /dev/cu* returns -

/dev/cu.Bluetooth-Incoming-Port /dev/cu.PL2303-00002014
/dev/cu.Bluetooth-Modem

kextstat returns -

153 0 0xffffff7f82342000 0x8000 0x8000 com.FTDI.driver.FTDIUSBSerialDriver (2.2.18) <130 34 5 4 3 1>

CHIRP Log:

CHIRP 0.4.0 on Darwin michaels-mbp 13.2.0 Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64 x86_64 (Python 2.7.2)
Registered Alinco_DR03T = DR03Radio
Registered Alinco_DR06T = DR06Radio
Registered Alinco_DR135T = DR135Radio
Registered Alinco_DR235T = DR235Radio
Registered Alinco_DR435T = DR435Radio
Registered Alinco_DJ596 = DJ596Radio
Registered Jetstream_JT220M = JT220MRadio
Registered Alinco_DJ175 = DJ175Radio
Registered AnyTone_5888UV = AnyTone5888UVRadio
Registered Intek_HR-2040 = IntekHR2040Radio
Registered Polmar_DB-50M = PolmarDB50MRadio
Registered Powerwerx_DB-750X = PowerwerxDB750XRadio
Registered Baofeng_UV-3R = UV3RRadio
Registered Baofeng_UV-5R = BaofengUV5R
Registered Baofeng_F-11 = BaofengF11Radio
Registered Baofeng_UV-82 = BaofengUV82Radio
Registered Baofeng_UV-6 = BaofengUV6Radio
Registered Baojie_BJ-UV55 = BaojieBJUV55Radio
Registered Kenwood_TH-D7 = THD7Radio
Registered Kenwood_TH-D7G = THD7GRadio
Registered Kenwood_TM-D700 = TMD700Radio
Registered Kenwood_TM-V7 = TMV7Radio
Registered Kenwood_TM-G707 = TMG707Radio
Registered Kenwood_TH-G71 = THG71Radio
Registered Kenwood_TH-F6 = THF6ARadio
Registered Kenwood_TH-F7 = THF7ERadio
Registered Kenwood_TM-D710 = TMD710Radio
Registered Kenwood_TH-D72_live_mode = THD72Radio
Registered Kenwood_TM-V71 = TMV71Radio
Registered Kenwood_TH-K2 = THK2Radio
Registered Kenwood_TM-271 = TM271Radio
Registered Kenwood_TM-281 = TM281Radio
Registered Kenwood_TM-471 = TM471Radio
Registered Icom_7200 = Icom7200Radio
Registered Icom_7000 = Icom7000Radio
Registered Icom_746 = Icom746Radio
Registered Yaesu_FT-1802M = FT1802Radio
Registered Yaesu_FT-2800M = FT2800Radio
Registered Yaesu_FT-60 = FT60Radio
Registered Yaesu_FT-7800_7900 = FT7800Radio
Registered Yaesu_FT-8800 = FT8800Radio
Registered Yaesu_FT-8900 = FT8900Radio
Registered Yaesu_FT-817 = FT817Radio
Registered Yaesu_FT-817ND = FT817NDRadio
Registered Yaesu_FT-817ND_US = FT817NDUSRadio
Registered Yaesu_FT-857_897 = FT857Radio
Registered Yaesu_FT-857_897_US = FT857USRadio
Registered Yaesu_FT-90 = FT90Radio
Registered Yaesu_FTM-350 = FTM350Radio
Registered Generic_CSV = CSVRadio
Registered Commander_KG-UV = CommanderCSVRadio
Registered RT_Systems_CSV = RTCSVRadio
Registered ARRL_Travel_Plus = TpeRadio
Registered Generic_XML = XMLRadio
Registered Baofeng_BF-888 = H777Radio
Registered Icom_IC-208H = IC208Radio
Registered Icom_IC-2100H = IC2100Radio
Registered Icom_IC-2200H = IC2200Radio
Registered Icom_IC-2720H = IC2720Radio
Registered Icom_IC-2820H = IC2820Radio
Registered Icom_IC-91_92AD = IC9xRadio
Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio
Registered Icom_IC-Q7A = ICQ7Radio
Registered Icom_IC-T70 = ICT70Radio
Registered Icom_IC-T7H = ICT7HRadio
Registered Icom_IC-T8A = ICT8ARadio
Registered Icom_IC-W32A = ICW32ARadio
Registered Icom_IC-V82_U82 = ICx8xRadio
Registered Icom_ID-31A = ID31Radio
Registered Icom_ID-51A = ID51Radio
Registered Icom_ID-800H_v2 = ID800v2Radio
Registered Icom_ID-880H = ID880Radio
Registered Icom_ID-80H = ID80Radio
Registered Kenwood_HMK = HMKRadio
Registered Kenwood_ITM = ITMRadio
Registered Puxing_PX-777 = Puxing777Radio
Registered Puxing_PX-2R = Puxing2RRadio
Registered TYT_TH-UV3R = TYTUV3RRadio
Registered TYT_TH-UVF8D = TYTUVF8DRadio
Registered Kenwood_TH-D72_clone_mode = THD72Radio
Registered TYT_TH-UVF1 = TYTTHUVF1Radio
Registered Kenwood_TK-7102 = KenwoodTK7102Radio
Registered Kenwood_TK-8102 = KenwoodTK8102Radio
Registered Kenwood_TK-7108 = KenwoodTK7108Radio
Registered Kenwood_TK-8108 = KenwoodTK8108Radio
Registered Baofeng_UV-B5 = BaofengUVB5
Registered Yaesu_VX-2 = VX2Radio
Registered Yaesu_VX-3 = VX3Radio
Registered Yaesu_VX-5 = VX5Radio
Registered Yaesu_VX-6 = VX6Radio
Registered Yaesu_VX-7 = VX7Radio
Registered Yaesu_VX-8_R = VX8Radio
Registered Yaesu_VX-8_DR = VX8DRadio
Registered Yaesu_VX-8_GE = VX8GERadio
Registered Vertex_Standard_VXA-700 = VXA700Radio
Registered Wouxun_KG-UVD1P = KGUVD1PRadio
Registered Wouxun_KG-UV6 = KGUV6DRadio
Registered Wouxun_KG-816 = KG816Radio
Registered Wouxun_KG-818 = KG818Radio
Icon /usr/share/pixmaps/chirp.png not found
Initialized MacOS support
/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/MacOS/../Resources/chirp/chirpw:146: PangoWarning: error opening config file '../Resources/etc/pango/pangorc': No such file or directory

a.show()
/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/Resources/chirp/chirp/platform.py:138: GtkWarning: Could not find the icon 'application-octet-stream'. The 'hicolor' theme
was not found either, perhaps you need to install it.
You can get a copy from:
http://icon-theme.freedesktop.org/releases
res = dlg.run()
ÿÿÿÿ
ÿÿÿÿ
Bandplan North American Band Plan has duplicates [1800000-2000000 160 Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ]
Bandplan North American Band Plan has duplicates [1800000-1810000 Digimodes simplex , 1800000-1810000 Digital Modes simplex ]
Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons simplex mode: CW , 1999000-2000000 Beacons simplex ]
Bandplan North American Band Plan has duplicates [3500000-4000000 80 Meter Band simplex , 3500000-4000000 80 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [7000000-7300000 40 Meter Band simplex , 7000000-7300000 40 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [10100000-10150000 30 Meter Band simplex , 10100000-10150000 30 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [10130000-10140000 All narrow band digimodes simplex , 10130000-10140000 RTTY simplex mode: RTTY ]
Bandplan North American Band Plan has duplicates [10140000-10150000 All modes, digimodes, no phone simplex , 10140000-10150000 Packet simplex ]
Bandplan North American Band Plan has duplicates [14000000-14350000 20 Meter Band simplex , 14000000-14350000 20 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [18068000-18168000 17 Meter Band simplex , 18068000-18168000 17 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [21000000-21450000 15 Meter Band simplex , 21000000-21450000 15 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [24890000-24990000 12 Meter Band simplex , 24890000-24990000 12 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [28000000-28070000 CW simplex mode: CW , 28000000-28070000 CW simplex mode: CW ]
Bandplan North American Band Plan has duplicates [28150000-28190000 All narrow band modes, digimodes simplex , 28150000-28190000 CW simplex mode: CW ]
Bandplan North American Band Plan has duplicates [29000000-29200000 All modes, AM preferred simplex mode: AM , 29000000-29200000 AM simplex mode: AM ]
Bandplan North American Band Plan has duplicates [29300000-29510000 Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ]
Bandplan North American Band Plan has duplicates [1800000-2000000 160 Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ]
Bandplan North American Band Plan has duplicates [1800000-1810000 Digimodes simplex , 1800000-1810000 Digital Modes simplex ]
Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons simplex mode: CW , 1999000-2000000 Beacons simplex ]
Bandplan North American Band Plan has duplicates [3500000-4000000 80 Meter Band simplex , 3500000-4000000 80 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [7000000-7300000 40 Meter Band simplex , 7000000-7300000 40 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [10100000-10150000 30 Meter Band simplex , 10100000-10150000 30 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [10130000-10140000 All narrow band digimodes simplex , 10130000-10140000 RTTY simplex mode: RTTY ]
Bandplan North American Band Plan has duplicates [10140000-10150000 All modes, digimodes, no phone simplex , 10140000-10150000 Packet simplex ]
Bandplan North American Band Plan has duplicates [14000000-14350000 20 Meter Band simplex , 14000000-14350000 20 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [18068000-18168000 17 Meter Band simplex , 18068000-18168000 17 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [21000000-21450000 15 Meter Band simplex , 21000000-21450000 15 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [24890000-24990000 12 Meter Band simplex , 24890000-24990000 12 Meter Band simplex ]
Bandplan North American Band Plan has duplicates [28000000-28070000 CW simplex mode: CW , 28000000-28070000 CW simplex mode: CW ]
Bandplan North American Band Plan has duplicates [28150000-28190000 All narrow band modes, digimodes simplex , 28150000-28190000 CW simplex mode: CW ]
Bandplan North American Band Plan has duplicates [29000000-29200000 All modes, AM preferred simplex mode: AM , 29000000-29200000 AM simplex mode: AM ]
Bandplan North American Band Plan has duplicates [29300000-29510000 Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ]
DTCS Code supported: True
DTCS Rx Code supported: False
DTCS Pol supported: False
Mode supported: True
Offset supported: True
Name supported: True
Tune Step supported: True
Name supported: True
ToneSql supported: False
Cross Mode supported: False
Comment supported: False
DTCS Code supported: True
DTCS Rx Code supported: False
DTCS Pol supported: False
Mode supported: True
Offset supported: True
Name supported: True
Tune Step supported: True
Name supported: True
ToneSql supported: False
Cross Mode supported: False
Comment supported: False
/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/MacOS/../Resources/chirp/chirpw:154: GtkWarning: Attempting to store changes into /Users/MichaelD/.local/share/recently-used.xbel', but failed: Failed to create file '/Users/MichaelD/.local/share/recently-used.xbel.08GLHX': No such file or directory
gtk.main()
/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/MacOS/../Resources/chirp/chirpw:154: GtkWarning: Attempting to set the permissions of/Users/MichaelD/.local/share/recently-used.xbel', but failed: No such file or directory
gtk.main()
/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/MacOS/../Resources/chirp/chirpw:154: GtkWarning: Attempting to store changes into `/Users/MichaelD/.local/share/recently-used.xbel', but failed: Failed to create file '/Users/MichaelD/.local/share/recently-used.xbel.RIHLHX': No such file or directory
gtk.main()
Opening port after pre_upload prompt.
--- Exception Dialog: could not open port /dev/cu.usbserial-A601VOLI: [Errno 2] No such file or directory: '/dev/cu.usbserial-A601VOLI' ---
Traceback (most recent call last):
File "/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/Resources/chirp/chirpui/mainapp.py", line 673, in do_upload
timeout=0.25)
File "/opt/kk7ds/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/serial/serialutil.py", line 260, in init
self.open()
File "/opt/kk7ds/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/serial/serialposix.py", line 276, in open
raise SerialException("could not open port %s: %s" % (self._port, msg))

SerialException: could not open port /dev/cu.usbserial-A601VOLI: [Errno 2] No such file or directory: '/dev/cu.usbserial-A601VOLI'

Opening port after pre_upload prompt.
Clone thread started
-- Exception: --
Traceback (most recent call last):
File "/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/Resources/chirp/chirpui/clone.py", line 225, in run
self.__radio.sync_out()
File "/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/Resources/chirp/chirp/yaesu_clone.py", line 221, in sync_out
_clone_out(self)
File "/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/Resources/chirp/chirp/yaesu_clone.py", line 142, in _clone_out
raise errors.RadioError("Failed to communicate with the radio: %s" % e)

RadioError: Failed to communicate with the radio: Radio did not ack block 1

Clone failed: Failed to communicate with the radio: Radio did not ack block 1
Clone thread ended
--- Exception Dialog: Failed to communicate with the radio: Radio did not ack block 1 ---
Traceback (most recent call last):
File "/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/MacOS/../Resources/chirp/chirpw", line 82, in
os.putenv("LANG", langs[0])

IndexError: list index out of range

Opening port after pre_upload prompt.
Clone thread started
-- Exception: --
Traceback (most recent call last):
File "/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/Resources/chirp/chirpui/clone.py", line 225, in run
self.__radio.sync_out()
File "/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/Resources/chirp/chirp/yaesu_clone.py", line 221, in sync_out
_clone_out(self)
File "/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/Resources/chirp/chirp/yaesu_clone.py", line 142, in _clone_out
raise errors.RadioError("Failed to communicate with the radio: %s" % e)

RadioError: Failed to communicate with the radio: Radio did not ack block 1

Clone failed: Failed to communicate with the radio: Radio did not ack block 1
Clone thread ended
--- Exception Dialog: Failed to communicate with the radio: Radio did not ack block 1 ---
Traceback (most recent call last):
File "/Users/MichaelD/Desktop/EHIA/Emergency Radio/Baofeng/chirp-0.4.0.app/Contents/MacOS/../Resources/chirp/chirpw", line 82, in
os.putenv("LANG", langs[0])

IndexError: list index out of range

Thanks!

Michael
W7HUT

Actions
Copy link

Also available in: Atom PDF

Copyright 2023 CHIRP Software LLC