Actions
Feature #230
openCollect paste errors into single error message
Added by Sander Pool almost 12 years ago. Updated about 11 years ago.
Start date:
07/01/2012
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
(all models)
I read the instructions above:
Description
- connect D710
- paste data from attached .csv
- lots of error dialogs appear that can only be dismissed in a single sequence (ie. dialogs appear modal) but the currently active one isn't necessary on top
- need to kill CHIRP
- there are several ways this could be prevented but they're probably hard to implement. It would be great if the paste/import stopped on the first error so that errors can be corrected without having to kill CHIRP.
CHIRP daily-20120529
Files
| D710_lots.csv (26.6 KB) D710_lots.csv | I think this is the .csv that caused problems | Sander Pool, 07/01/2012 12:58 PM |
Updated by Dan Smith almost 12 years ago
- Subject changed from Uploading illegal data to D710 caused dozens of error dialogs to pile up, requiring a task kill to Uploading illegal data to D710 caused dozens of error dialogs
- Status changed from New to Feedback
- Assignee set to Tom Hayward
- Target version set to 0.2.3
Please attach a debug log. Instructions are on the "how to file issues" page.
Updated by Sander Pool almost 12 years ago
Unfortunately the debug log is created new each time CHIRP starts rather than appending. I just started it to report an accurate version number so the debug log is not helpful in this case. I will try to repeat the issue at a later time and attach the debug log then.
Updated by Dan Smith almost 12 years ago
- Status changed from Feedback to Blocked
The reset makes it much easier for us to examine individual issues. We'll take a look at this when you have the debug log information for us.
Thanks!
Updated by Tom Hayward over 11 years ago
Reproduced by pasting 98-108 of the csv file. The debug log tells the whole story...
Exception running RadioJob: 159.8 is not in list
-- Exception: --
Traceback (most recent call last):
File "/Users/tom/src/chirp.hg/chirpui/common.py", line 97, in _execute
result = func(*self.args, **self.kwargs)
File "/Users/tom/src/chirp.hg/chirp/kenwood_live.py", line 211, in set_memory
spec = self._make_mem_spec(memory)
File "/Users/tom/src/chirp.hg/chirp/kenwood_live.py", line 880, in _make_mem_spec
"%02i" % (self._kenwood_valid_tones.index(mem.ctone)),
ValueError: 159.8 is not in list
------
Job Args: (Memory[685],)
Job KWArgs: {}
Job Called from:
File "./chirpw", line 133, in
gtk.main()
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 671, in mh
changed = self.paste_selection()
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 1328, in paste_selection
clipboard.request_text(self._paste_selection)
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 1322, in _paste_selection
job = common.RadioJob(self._set_memory_cb, "set_memory", mem)
Exception running RadioJob: 159.8 is not in list
-- Exception: --
Traceback (most recent call last):
File "/Users/tom/src/chirp.hg/chirpui/common.py", line 97, in _execute
result = func(*self.args, **self.kwargs)
File "/Users/tom/src/chirp.hg/chirp/kenwood_live.py", line 211, in set_memory
spec = self._make_mem_spec(memory)
File "/Users/tom/src/chirp.hg/chirp/kenwood_live.py", line 880, in _make_mem_spec
"%02i" % (self._kenwood_valid_tones.index(mem.ctone)),
ValueError: 159.8 is not in list
------
Job Args: (Memory[686],)
Job KWArgs: {}
Job Called from:
File "./chirpw", line 133, in
gtk.main()
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 671, in mh
changed = self.paste_selection()
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 1328, in paste_selection
clipboard.request_text(self._paste_selection)
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 1322, in _paste_selection
job = common.RadioJob(self._set_memory_cb, "set_memory", mem)
Exception running RadioJob: 159.8 is not in list
-- Exception: --
Traceback (most recent call last):
File "/Users/tom/src/chirp.hg/chirpui/common.py", line 97, in _execute
result = func(*self.args, **self.kwargs)
File "/Users/tom/src/chirp.hg/chirp/kenwood_live.py", line 211, in set_memory
spec = self._make_mem_spec(memory)
File "/Users/tom/src/chirp.hg/chirp/kenwood_live.py", line 880, in _make_mem_spec
"%02i" % (self._kenwood_valid_tones.index(mem.ctone)),
ValueError: 159.8 is not in list
------
Job Args: (Memory[687],)
Job KWArgs: {}
Job Called from:
File "./chirpw", line 133, in
gtk.main()
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 671, in mh
changed = self.paste_selection()
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 1328, in paste_selection
clipboard.request_text(self._paste_selection)
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 1322, in _paste_selection
job = common.RadioJob(self._set_memory_cb, "set_memory", mem)
Exception running RadioJob: 159.8 is not in list
-- Exception: --
Traceback (most recent call last):
File "/Users/tom/src/chirp.hg/chirpui/common.py", line 97, in _execute
result = func(*self.args, **self.kwargs)
File "/Users/tom/src/chirp.hg/chirp/kenwood_live.py", line 211, in set_memory
spec = self._make_mem_spec(memory)
File "/Users/tom/src/chirp.hg/chirp/kenwood_live.py", line 880, in _make_mem_spec
"%02i" % (self._kenwood_valid_tones.index(mem.ctone)),
ValueError: 159.8 is not in list
------
Job Args: (Memory[688],)
Job KWArgs: {}
Job Called from:
File "./chirpw", line 133, in
gtk.main()
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 671, in mh
changed = self.paste_selection()
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 1328, in paste_selection
clipboard.request_text(self._paste_selection)
File "/Users/tom/src/chirp.hg/chirpui/memedit.py", line 1322, in _paste_selection
job = common.RadioJob(self._set_memory_cb, "set_memory", mem)
PC->RADIO: ME 689,0145050000,0,0,0,0,0,0,08,08,000,00000000,0,0000000000,0,0
D7->PC: ME
PC->RADIO: MN 689,W1HAD
D7->PC: MN 689,W1HAD
PC->RADIO: ME 690,0145030000,0,0,0,0,0,0,08,08,000,00000000,0,0000000000,0,0
D7->PC: ME
PC->RADIO: MN 690,W1FZG
D7->PC: MN 690,W1FZG
PC->RADIO: ME 691,0145030000,0,0,0,0,0,0,08,08,000,00000000,0,0000000000,0,0
D7->PC: ME
PC->RADIO: MN 691,N1OTW-10
D7->PC: MN 691,N1OTW-10
PC->RADIO: ME 692,0145030000,0,0,0,0,0,0,08,08,000,00000000,0,0000000000,0,0
D7->PC: ME
PC->RADIO: MN 692,W1GTT-10
D7->PC: MN 692,W1GTT-10
PC->RADIO: ME 693,0145050000,0,0,0,0,0,0,08,08,000,00000000,0,0000000000,0,0
D7->PC: ME
PC->RADIO: MN 693,W1OEM-10
D7->PC: MN 693,W1OEM-10
PC->RADIO: ME 694,0145070000,0,0,0,0,0,0,08,08,000,00000000,0,0000000000,0,0
D7->PC: ME
PC->RADIO: MN 694,WA2PNU
D7->PC: MN 694,WA2PNU
PC->RADIO: ME 695,0145050000,0,0,0,0,0,0,08,08,000,00000000,0,0000000000,0,0
D7->PC: ME
PC->RADIO: MN 695,N2NSA-10
D7->PC: MN 695,N2NSA-10
The errors say that the D710 does not accept 159.8 Hz as a CTCSS tone. This is true; the Kenwoods don't support this tone.
The dialogs can be dismissed by clicking OK, but there is some lag, so it's confusing. It would be more annoying had I pasted 100 rejected channels, not just 4 of 10.
The only thing that could be improved here is providing a better way to view multiple errors.
Updated by Dan Smith over 11 years ago
- Target version changed from 0.2.3 to 0.2.4
Updated by Tom Hayward over 11 years ago
- Tracker changed from Bug to Feature
- Subject changed from Uploading illegal data to D710 caused dozens of error dialogs to Collect import/export errors into single error message
- Status changed from Blocked to In Progress
- Target version changed from 0.2.4 to 0.3.0
- Model affected changed from kenwood D710 to (all models)
Updated by Tom Hayward over 11 years ago
- Subject changed from Collect import/export errors into single error message to Collect paste errors into single error message
Oops, mis-named this bug.
Actions