Actions
Bug #2841
closedUV5RE+ N5R-213 bug? Dual watch w no priority. set to 1 slot RXs on other slot then reverts 1st slot to TX
Status:
Rejected
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
09/06/2015
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
(All models)
Platform:
Linux
I read the instructions above:
Description
UV5RE+
firmware N5R-213
chirp-daily 20150814
Problem:
radio is set to dual watch with no priority.
radio set to slot A and when it receives RX on slot B (it listens there)
but then flips back to slot A to TX.
Same happens if B slot is selected and picks up RX on slot A, it reverts to slot B to TX.
I've also tested TDR priorities A, B or OFF and it has no effect.
Firmware bug or new coding?
Updated by Jim Unroe over 8 years ago
- Status changed from New to Rejected
This is a change in the way the radio behaves based on the TDR-AB settings when TDR is enabled. There are about 3 different versions floating around (including the original method where priority gets forced to A or B). CHIRP still programs the radio's settings properly.
Jim KC9HI
Actions