Project

General

Profile

Actions

New Model #2921

open

Pofung UV-TEN4

Added by Kenneth Castleman about 9 years ago. Updated over 4 years ago.

Status:
Feedback
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
10/14/2015
Due date:
% Done:

0%

Estimated time:
Equipment Loan/Gift Offered:
No
I read the instructions above:

Description

The Pofung UV-TEN4 is a powerful yet inexpensive VHF/UHF transceiver. The current Chirp version does not support it.

Actions #1

Updated by Jim Unroe about 9 years ago

  • Status changed from New to Feedback

Kenneth,

Are you sure this isn't just another one of many "UV5R variants?":http://chirp.danplanet.com/projects/chirp/wiki/Baofeng_UV5R_Variants There are currently something like 39 models listed that use the UV-5R selection for support.

Jim KC9HI

Actions #2

Updated by Kenneth Castleman about 9 years ago

Jim,
I tried it in the latest version of Chirp, and I got the message "Radio did not respond."
I selected the UV5R and tried it with both COM ports, 1 and 9.
I also tried the other supported Baofeng models and got various error messages.
If this thing is a clone of one of the supported radios, I haven't found it.

The factory programming software for this radio is the same as for the UV66,
and I did get that software working with the UV-TEN4. The UV66 is not supported in Chirp.

Actions #3

Updated by Bernhard Hailer over 4 years ago

  • Target version set to chirp-legacy
  • Chirp Version changed from 0.4.0 to daily

Have you been able to resolve this on your own since you submitted this?
Have you tried with a recent version since you submitted this?
The error you describe suggests a problem with the cable.
If you haven't, and if you're still having this issue, please refer to the Wiki "How To Report Issues" and provide a debug log. Thanks!

Actions

Also available in: Atom PDF