CHIRP

I can do that. Any idea where I can find the correct values for tone, DTCS, duplex, offset, mode and tunestep for these frequencies?

It doesn't affect anything since duplex is set to "", but the "Red dot" could have its offset changed to 0.000000.

Shouldn't the "Brown DPX" and "Yellow DPX" channels be programmed as repeaters? Possibly...

Loc = 16
Frequency = 464.500000
Duplex = +
Offset = 5.000000

Loc = 17
Frequency = 464.550000
Duplex = +
Offset = 5.000000

And wouldn't all the "dots" except the ones that got moved to MURS need to be set to narrow FM?

Mode = NFM

http://www.rrmediagroup.com/Features/FeaturesDetails/FID/163

Steven,

I still don't think you have the Brown DPX and Yellow DPX channels correct. What I believe you want do do is put the Brown Dot and Yellow Dot frequencies in for the Frequency column (464.500000 and 464.550000 respectively). Then the +5.000 offset will automatically put the transmit on the correct Brown DPX and Yellow DPX frequencies (469.500000 and 469.550000 respectively). So in a receive only scenario, there no difference between the Brown Dot/Yellow Dot and Brown DPX/Yellow DPX channels.

I also recommend that you join and check into the "chirp_devel":http://intrepid.danplanet.com/mailman/listinfo/chirp_devel mailing list to ask what else may be necessary for you to do in order to have this stock config file added to CHIRP.

Jim