Project

General

Profile

Actions

Bug #3385

closed

Baofeng UV-5R5 will not load Chirp frequency table, and 5R5 transmits to UV-5R, but will not receive

Added by Brian Evans over 8 years ago. Updated over 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
02/23/2016
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Baofeng UV-5R5
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Have 3 UV-5R's and they all work great with each other, using the loaded CHIRP frequency table. Expanded to add 2 UV-5R5s, and they won't accept the Chirp frequency table and when I manually load the one critical frequency we need, and transmit from the 5R5's, the 5R's receive it, but the 5R5's will not receive any transmissions from the 5R's or the other 5R5.

I am not sure that I am correctly loading the frequency in the 5R5's. I am simply putting the single frequency in the readout...is there more to it than that? Can the 5R5's be made to work with the Chirp table?

Thanks!

Actions #1

Updated by Hans PD0AC over 8 years ago

Brian Evans wrote:

Have 3 UV-5R's and they all work great with each other, using the loaded CHIRP frequency table. Expanded to add 2 UV-5R5s, and they won't accept the Chirp frequency table and when I manually load the one critical frequency we need, and transmit from the 5R5's, the 5R's receive it, but the 5R5's will not receive any transmissions from the 5R's or the other 5R5.

I am not sure that I am correctly loading the frequency in the 5R5's. I am simply putting the single frequency in the readout...is there more to it than that? Can the 5R5's be made to work with the Chirp table?

Thanks!

I have two UV-5R5's and didn't have any issues with programming at all, nor with communicating with other radios - and I have truck loads of them. Not surprisingly I wonder what can be so special about your situation / setup.

Hans

Actions #2

Updated by Jim Unroe over 8 years ago

  • Status changed from New to Feedback

Sounds like you programmed a receive CTCSS tone or DCS code on the new radio and none of the other radios are transmitting the matching tone. That is exactly how selective squelch is supposed to work.

Jim KC9HI

Actions #3

Updated by Bernhard Hailer over 4 years ago

  • Status changed from Feedback to Closed
  • Assignee deleted (Dan Smith)

No more traffic on this ticket.

Actions

Also available in: Atom PDF