Feature #3565
closedKenwood TM-D710GA: show message explaining where to plug in data cable
100%
Description
The TM-D710GA is not recognized in the latest build on either WIndows or Mac.
The radio is reported as a TM-D710GP and unsupported.
This seems similar to New Model Request #1287. Perhaps adding model detection for the TM-D710GA and inheriting the properties of the TM-D710G.
Updated by Jess Haas almost 8 years ago
TM-D710GP is the ID the control head returns. You need to plug in to to the radio body and not the control head. The port on the control head is only for accessing the TNC and will not allow radio programming.
This bug can be closed but if there is a way to add a message in chirp that explains this when this radio ID is received I am sure that it would help a lot of people.
-Jess
Updated by Rick DeWitt almost 5 years ago
- Status changed from New to Closed
- % Done changed from 0 to 100
- Chirp Version changed from 0.4.0 to daily
See note about using wrong PC Port.
Updated by Bernhard Hailer over 4 years ago
- Status changed from Closed to Feedback
Re-opened until suggestion is impemented:
if there is a way to add a message in chirp that explains this when this radio ID is received
Updated by Bernhard Hailer over 4 years ago
- Tracker changed from New Model to Feature
- Subject changed from TM-D710GA to Kenwood TM-D710GA: show message explaining where to plug in data cable
- Target version set to chirp-legacy
- Model affected set to Kenwood TM-D710GA
Updated by Rick DeWitt about 4 years ago
- Status changed from Feedback to Closed
- Assignee set to Rick DeWitt
Info message was implemented in last driver release. Issue # 7467
Updated by Dan Smith over 1 year ago
- Has duplicate Bug #10632: Radio responded as Kenwood D710GP added