CHIRP

CHIRP Daily 20160702, also in older versions.

After successfully reading the radio:
DTCS for TX is Correct
DTCS for RX reads 023N vs Programmed 065N (written by TYT Software Version 1.0.8)
"CrossMode" DTCS becomes Tone->Tone, should be DTCS.

Subsequent Read/Write of Radio to/From TYT Software was verified correct with a handheld TX.
Changing the 023N in CHIRP to 065N and crossmode to ->DTCS then writing to the radio, reading from TYT it is correct.

It seams to be a GUI Display issue with CHIRP for this Model.

The GUI Display also appends subsequent characters behind channel label blocks that are not used, as in short names.

This bug was basically accidently stumbled upon

Thank You,

Rich Davis W4NMH EMT

​ARRL Life Member, ​Instructor​
​Official Emergency Station​ (OES)
Official Relay Station (ORS)
Technical Specialist​​ (TS) ​
​​Volunteer Examiner (VE)

http://www.Norfolk-ARES.org

(removed irrelevant text [AE6YN])