Bug #4459
Original Yaesu FT-817
Status: | New | Start date: | 01/25/2017 | |
---|---|---|---|---|
Priority: | Normal | Due date: | ||
Assignee: | - | % Done: | 0% |
|
Category: | - | |||
Target version: | chirp-daily | |||
Chirp Version: | daily | Platform: | Windows | |
Model affected: | Yaesu FT-817 |
Description
I obtained an earlier version Yaesu FT-817 from a local ham. When I go to settings, CW and put my call in the Callsign and upload to the radio it does not change from his call. This is menu item 31. I tried a CPU Master Reset and did a fresh download from the radio. Changed the CW ID to my call and uploaded. Menu item 31 did not change but stayed at the factory default of Yaesu. I can program memory positions and change other settings. I am using Chirp 20170124 on a windows 10 platform. Any suggestions?
History
Updated by Bernhard Hailer over 2 years ago
- Subject changed from Original YEASU FT817 to Original Yaesu FT817
- Description updated (diff)
- Target version set to chirp-daily
- Model affected changed from YEASU FT-817 to Yaesu FT-817
Updated by Bernhard Hailer over 2 years ago
- Subject changed from Original Yaesu FT817 to Original Yaesu FT-817
- Description updated (diff)