Actions
Bug #4459
openOriginal Yaesu FT-817
Start date:
01/25/2017
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
Yaesu FT-817
Platform:
Windows
I read the instructions above:
Description
I obtained an earlier version Yaesu FT-817 from a local ham. When I go to settings, CW and put my call in the Callsign and upload to the radio it does not change from his call. This is menu item 31. I tried a CPU Master Reset and did a fresh download from the radio. Changed the CW ID to my call and uploaded. Menu item 31 did not change but stayed at the factory default of Yaesu. I can program memory positions and change other settings. I am using Chirp 20170124 on a windows 10 platform. Any suggestions?
Updated by Bernhard Hailer about 4 years ago
- Subject changed from Original YEASU FT817 to Original Yaesu FT817
- Description updated (diff)
- Target version set to chirp-legacy
- Model affected changed from YEASU FT-817 to Yaesu FT-817
Updated by Bernhard Hailer about 4 years ago
- Subject changed from Original Yaesu FT817 to Original Yaesu FT-817
- Description updated (diff)
Actions