CHIRP

I'm trying to program my radio. I had a bad cable before and just got my FTDI cable today, while I can get the radio to recognize, I can't download the radio.

Baofeng BF-F9V2+, firmware bfp3-25 (3-key on startup)
CHIRP daily-20170714
USB Serial Converter, FTDI, 2.12.28.0 08/16/2017

Download from Radio > COM3, Baofeng, BF-F8HP > "An error has occurred. Radio did not respond"

Other troubleshooting, beside driver updates and latest versions... rebooted machine after updated FTDI driver. Visually inspected (flashlight) dual-ports on radio. Firm grip-pressed the cable to the radio during "download". Log file has been attached.

Any guidance would be appreciated. Thanks,
Michael.
K2EXO

Snippet:

[2017-09-04 13:29:55,510] chirp.drivers.uv5r - ERROR: Radio did not respond
[2017-09-04 13:29:57,513] chirp.drivers.uv5r - INFO: Sending Magic: 000: 50 bb ff 20 14 04 13 00 P.......

[2017-09-04 13:29:58,586] chirp.drivers.uv5r - ERROR: Radio did not respond
[2017-09-04 13:30:00,586] chirp.drivers.uv5r - INFO: Sending Magic: 000: 50 0d 0c 20 16 03 28 00 P.....(.

[2017-09-04 13:30:01,661] chirp.ui.reporting - DEBUG: Reporting exception
[2017-09-04 13:30:01,663] chirp.ui.common - ERROR: -- Exception: --
[2017-09-04 13:30:01,663] chirp.ui.common - ERROR: Traceback (most recent call last):
File "chirp\ui\clone.pyo", line 249, in run
File "chirp\drivers\uv5r.pyo", line 806, in sync_in
File "chirp\drivers\uv5r.pyo", line 542, in _do_download
File "chirp\drivers\uv5r.pyo", line 537, in _ident_radio
RadioError: Radio did not respond

[2017-09-04 13:30:01,663] chirp.ui.common - ERROR: ----------------
[2017-09-04 13:30:01,663] chirp.ui.clone - ERROR: Clone failed: Radio did not respond
[2017-09-04 13:30:01,706] chirp.ui.clone - DEBUG: Clone thread ended
[2017-09-04 13:30:01,706] chirp.ui.reporting - DEBUG: Reporting model usage: Baofeng_BF-F8HP,download,True
[2017-09-04 13:30:01,707] chirp.ui.reporting - DEBUG: Reporting exception
[2017-09-04 13:30:01,707] chirp.ui.inputdialog - ERROR: --- Exception Dialog: Radio did not respond ---
[2017-09-04 13:30:01,707] chirp.ui.inputdialog - ERROR: Traceback (most recent call last):
File "chirpw", line 64, in
AttributeError: 'NoneType' object has no attribute 'split'

[2017-09-04 13:30:01,709] chirp.ui.inputdialog - ERROR: ----------------------------