Bug #5557
closedBaofeng UV-5R
0%
Description
I keep getting an error involving the Bluetooth port when I try to connect my handie. Ermo 16 error code
Updated by bob gagnon almost 7 years ago
I am using the Hesenate HT-UV8R radios (3), 2 use the profile for the VV-5R the third uses the profile for the BF-F8HP. When using the 5R i get an error of firmware revision. The F8HP seems to work but no incremental settings come up. I have the 'real Baofeng cable' and a clone cable it reacts the same on both cables.
Updated by Jim Unroe almost 7 years ago
- Status changed from New to Feedback
Dennis DeVilbiss wrote:
I keep getting an error involving the Bluetooth port when I try to connect my handie. Ermo 16 error code
You are choosing the wrong port. It will be COMx port, not Bluetooth.
Jim KC9HI
Updated by Jim Unroe almost 7 years ago
bob gagnon wrote:
I am using the Hesenate HT-UV8R radios (3), 2 use the profile for the VV-5R the third uses the profile for the BF-F8HP. When using the 5R i get an error of firmware revision. The F8HP seems to work but no incremental settings come up. I have the 'real Baofeng cable' and a clone cable it reacts the same on both cables.
This has nothing to do with Dennis' issue. Open a separate issue.
Jim KC9HI
Updated by Bernhard Hailer almost 5 years ago
- Status changed from Feedback to Closed
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from Baofeng UV-5r to Baofeng UV-5R
A solution has been suggested.
No more feedback by submitter.