Project

General

Profile

Actions

Bug #5985

closed

BF-888s Basic settings all checked regardless of config settings

Added by Roy Urick almost 6 years ago. Updated over 4 years ago.

Status:
Closed
Priority:
High
Assignee:
-
Category:
-
Target version:
-
Start date:
07/29/2018
Due date:
% Done:

100%

Estimated time:
Chirp Version:
daily
Model affected:
BF-888s
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Can no longer program BF-888s radios.

When programming a BF-888S, the basic settings are not programming correctly. Every single checkbox gets turned on during upload, regardless of config selections.

Test method:

  1. Download default config: Appropriate check boxes are assigned. (only voice prompt, scan, voltage tx inhibit, beep, battery saver checked)
  2. Re-upload same config. No errors (but it does end quicker than expected without error).
  3. Re-download from same radio and options in the radio do not match what was uploaded 60 seconds earlier in step 2. ALL checkboxes are now enabled.

This worked before. 6 Months ago I programmed 6 radios and they worked fine. I only discovered this issue when trying to add more radios to our pool. Even the original radios that were programmed successfully behave incorrectly now.


Files

Baofeng_BF-888 default personal.img (992 Bytes) Baofeng_BF-888 default personal.img good factory settings. Proper settings checked. Roy Urick, 07/29/2018 12:38 PM
Baofeng_BF-888 personal re-upload results.img (992 Bytes) Baofeng_BF-888 personal re-upload results.img same factory settings, after uploading and re-downloading- ALL options checked Roy Urick, 07/29/2018 12:38 PM
programmed settings.PNG (21.2 KB) programmed settings.PNG expected settings Roy Urick, 07/29/2018 12:38 PM
upload results.PNG (21.4 KB) upload results.PNG actual settings programmed on radio after upload Roy Urick, 07/29/2018 12:38 PM
Actions

Also available in: Atom PDF