Actions
Bug #6271
closedUV-5R receive backlight not timing out
Start date:
12/01/2018
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
Baofeng UV-5R
Platform:
All
I read the instructions above:
Description
My receive backlight on my Baofeng UV-5R does not time out while receiving. I am tuned to the NOAA frequency. It does turn off when transmission ends on other frequencies.
My other Baofeng UV-5RV3+ does time out while on the NOAA channel.
Is this a quirk of this radio?
Updated by Jim Unroe about 6 years ago
- Status changed from New to Feedback
Sounds like a hardware issue. Adjust the ABR setting from the keypad or using the Baofeng software to see if there is a difference.
Jim KC9HI
Updated by Bernhard Hailer over 4 years ago
- Status changed from Feedback to Closed
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from UV-5R to Baofeng UV-5R
- Platform changed from Windows to All
No more feedback by submitter.
Actions