New Model #6441
closedBaofeng Radio UV-5R MK5 8W 2019 Mirkit Edition
0%
Description
Nice radio - it would be nice if it were supported
Updated by Patrick Larkin over 5 years ago
John Mocho wrote:
Nice radio - it would be nice if it were supported
Have you tried it as a BF-F8HP?
Updated by Bernhard Hailer over 4 years ago
- Status changed from New to Feedback
- Target version set to chirp-legacy
Have you tried using the BF-F8HP driver, as suggested in the previous post?
Updated by Ben White almost 4 years ago
I'm not the original submitter but I also have the UV-5R 8W Mirkit Edition and the BF-F8HP does work to set H/M/L power settings, etc.
The Settings tab is empty, however, and all the non-channel settings get reset to defaults after writing to the radio.
Updated by Jim Unroe almost 4 years ago
This has recently become a common problem because the menu from the factory has been set to an out-of-range value. Usually a quick and dirty way to "fix" the problem is to go into VFO mode and set menu 2 (TXP) in both VFOs to MID. Download from CHIRP and the menus should now be there. Once it is "fixed" you can set the menu back to the value that you want.
Jim KC9HI
Updated by Ben White almost 4 years ago
Amazing, thanks Jim, that was it. Yeah I can confirm it looks fine with the BF-F8HP profile.
Updated by Jim Unroe almost 4 years ago
- Status changed from Feedback to Resolved
Ben,
I went ahead and added the UV-5R MK5 to the CHIRP Supported Radio Models list.
It isn't easy to explain on the list but...
UV-5R like models with 2 TX power levels use Vendor Baofeng | Model: UV-5R
UV-5R like models with 3 TX power levels use Vendor Baofeng | Model: BF-F8HP
UV-5R like models with 3 bands use Vendor Radioddity | Model: UV-5RX3
Have fun with your radio.
Jim KC9HI