Bug #7189
closed6.25 step not available on Yaesu FT-4XE
0%
Description
The European model of Yaesu FT-4X (FT-4XE) DOES allow for a 6.25 step in the frequency. Chirp, however, does not allow this step when saving the frequency in the table.
Updated by Bernhard Hailer almost 5 years ago
- Subject changed from 6.25 step not avaiable on Yaesu FT-4X to 6.25 step not available on Yaesu FT-4XE
- Status changed from New to Feedback
- Target version set to chirp-legacy
- Model affected changed from FT-4X to FT-4XE
Hello Erik, I would be very interested in getting an image of your FT-4XE. Any image would be fine, even one obtained right after a factory reset. I might then be able to fix the 6.25 kHz tune step problem.
Updated by Erik Zalitis almost 5 years ago
Hi Bernhard
I'll fix that, but I'm not sure what you mean with an image. Do you want me to dump the channels with Chirp and send you the results? That's not a problem. If you need something like a copy of the rom chips, I need some sort of guide on how to do that.
Regards, Erik.
Updated by Erik Zalitis almost 5 years ago
Ok. I'm a bit of a noob. Think I figured it out. Here's an image from the radio. It should be correct:
https://the.ericade.net/Files/Yaesu_FT-4XR_20191029.zip
Updated by Bernhard Hailer almost 5 years ago
- Status changed from Feedback to Closed
- Model affected changed from FT-4XE to Yaesu FT-4XE
Thanks Erik! I'm working on a fix.
I'm closing this ticket, because it duplicates #6619. Please leave any further feedback there. Thanks!