New Model #7387
closedYaesu FT-4VR
Added by Matt Atwood over 4 years ago. Updated about 4 years ago.
100%
Description
Have radio and USB
Files
| debug(Clone Mode).log (24.9 KB) debug(Clone Mode).log | radio in just CLONE mode | Matt Atwood, 01/25/2020 05:18 PM | |
| debug(TX Mode).log (25.1 KB) debug(TX Mode).log | radio in CLONE / TX mod | Matt Atwood, 01/25/2020 05:18 PM | |
| ft4.py (52.3 KB) ft4.py | Yaesu FT-4X / FT-4V / FT-65 / FT-25 driver | Bernhard Hailer, 01/26/2020 04:26 PM | |
| Yaesu_FT-4VR_Factory_Reset.img (8.49 KB) Yaesu_FT-4VR_Factory_Reset.img | Matt Atwood, 01/27/2020 01:16 AM |
Updated by Bernhard Hailer over 4 years ago
- Status changed from New to Feedback
Did you try the FT-4 selection in Chirp? It needs to be a recent version of Chirp. If you did try, what happened, and can you provide a log?
Updated by Matt Atwood over 4 years ago
Thanks for the recommendation Bernhard. I did select FT-4XR in CHIRP - it is the only FT-4 selection available. Upon initiating transfer (Download from radio) I received an error message from CHIRP "Failed to communicate with radio: Incorrect ID read from radio". I assume I need to enter "CLONE" mode on the XCVR, which I did, in both TX and RX mode, as well as just turning the HT on and attempting to query the radio. I have tried several permutations of the process to get the radio to clone and it fails every time. I am using CHIRP version 20200107.
Where do I find the log that you asked about? I am unable to locate a log file of any kind for CHIRP.
Updated by Bernhard Hailer over 4 years ago
For how to retrieve the log, please refer to the Wiki: How To Report Issues. The log will definitely tell us more.
Updated by Matt Atwood over 4 years ago
- File debug(Clone Mode).log debug(Clone Mode).log added
- File debug(TX Mode).log debug(TX Mode).log added
Thank Bernhard. Attached are the logs. The first (TX Mode) had the radio in CLONE / TX mode. The second, (CLONE Mode) had the radio in just CLONE mode.
Updated by Bernhard Hailer over 4 years ago
- Assignee set to Bernhard Hailer
Ah - it is a new model! This radio identifies as "IFT-15R", while the FT-4R is "IFT-35R".
I can add this radio, but I would be flying blind. Let me dive into the manual for the FT-4V. I hope I can say a little more soon...
Updated by Matt Atwood over 4 years ago
Thanks Bernhard! If a radio is needed, I have a unit to test with.
Updated by Bernhard Hailer over 4 years ago
Hi Matt, I did a "blind flight", and it might just work.
To help me test this, please download the attached ft4.py and launch chirp.
- enable developer mode: help -> check enable developer functions
- load this module: file -> load module, point to the ft4.py you downloaded
- open radio communication as usual but select FT-4V as radio model from list
- perform any testing, download/upload, modifications etc.
In case you have to restart chirp, you will have to repeat step 2 again to use this modified candidate.
Please let me know how it goes, and I'll submit a patch to chirp. To enable me to do that, I need to ask you for an image from your radio; when you prepare one for me, please ensure that there's no private information in it you don't want to share: an image right after a factory reset is fine. That image is needed for testing before I'm allowed to submit.
Updated by Matt Atwood over 4 years ago
It works perfectly! I was able to download from the radio, as well as upload to it. I will reset the radio tomorrow AM and send the img file to you. Thank you so much!
Updated by Bernhard Hailer over 4 years ago
Excellent, glad to hear! Please don't forget that image; without it I can't submit it.
Updated by Bernhard Hailer over 4 years ago
- Status changed from Feedback to In Progress
Updated by Matt Atwood over 4 years ago
Here is the factory reset image. Thanks gain for your help!
- Matt
Updated by Bernhard Hailer over 4 years ago
Sorry, there's some delay; I need to restructure the base driver (ft4.py) first. That's essentially complete, but that patch needs to be accepted first. See #7615.
Updated by Anonymous about 4 years ago
- Status changed from In Progress to Closed
Applied in changeset commit:5a1de50496e1.
Updated by Bernhard Hailer about 4 years ago
WANTED:
Image of an FT-4VE. If you have one, please send it to me!
The image can be downloaded using "FT-4VR" as radio in Chirp. Once I have the image, I'll add the FT-4VE to Chirp.