Bug #7939
Radioddity GA-510 download reverses tones and changes Tone Modes
Status: | Closed | Start date: | 06/02/2020 | |
---|---|---|---|---|
Priority: | Normal | Due date: | ||
Assignee: | - | % Done: | 0% |
|
Category: | - | |||
Target version: | - | |||
Chirp Version: | daily | Platform: | Windows | |
Model affected: | All |
Description
Downloading the Radioddity GA-510 into CHIRP results in the Transmit CTCSS tones being transposed into the Receive CTCSS fields and the "Tone Mode" for type "Tone" is changed to "Cross". Additionally the "Cross Mode" is then set to "->Tone". Additionally, DTCS Tones are reversed between "DTCS Code" and "DTCS Rx Code" for "Cross" mode "DTCS->DTCS".
Associated revisions
Fix transposed GA-510 tones
History
Updated by John Boyle 4 months ago
I received the GA-510 today and can confirm that with CHIRP the CTCSS tones are being transposed exactly as per the original report. The RadioOddity CPS does upload and download the CTCSS tones correctly.
Updated by Dan Smith 4 months ago
- File ga510.py added
- Status changed from New to In Progress
Can one (or both) of you try the attached module? Enable developer functions under Help, if not already, and then File->Load Module and choose this file.
Updated by John Boyle 4 months ago
Hi Dan, I just loaded the .py module and did a download from the radio. CTCSS tones and tone squelch settings were correct in CHIRP. I then uploaded the data back to the radio amd the CTCSS and tone squelch settings are now correct. I did not test DCS as I do not have any channels with DCS programmed.
Thanks! John
Updated by John Boyle 4 months ago
Correction: My previous report was premature. The channels which had tone on TX and RX in the radio did not come in set to "cross", they came in as "TSQL". The channels that had tone on TX only downloaded to CHIRP correctly. When I switched to "cross" and set the tones frequencies correctly in CHIRP I was able to upload them to the radio and they were correct.
Updated by Jim Unroe 4 months ago
John Boyle wrote:
Correction: My previous report was premature. The channels which had tone on TX and RX in the radio did not come in set to "cross", they came in as "TSQL". The channels that had tone on TX only downloaded to CHIRP correctly. When I switched to "cross" and set the tones frequencies correctly in CHIRP I was able to upload them to the radio and they were correct.
John,
That's the way it is supposed to be. Setting Tone Mode to TSQL and ToneSql to the appropriate CTCSS tone sets up the channel to TX the selected tone and sets up the radio's squelch to require that same to the be present on the received signal to open the squelch. You would only use "Cross Mode" if the CTCSS tones were not the same both ways (TX and RX). So CHIRP notices how it was programmed and switched it to the way it should have been.
Jim KC9HI
Updated by John Boyle 4 months ago
Ah understood, thanks. Will this patch be incorporated in a release? Or should I load it every time I use CHIRP with this radio?
Updated by Jim Unroe 4 months ago
John Boyle wrote:
Ah understood, thanks. Will this patch be incorporated in a release? Or should I load it every time I use CHIRP with this radio?
John,
This was the reason for the 20200909 release. So it has already incorporated into CHIRP.
Jim KC9HI
Updated by John Boyle 4 months ago
Thanks so much for the quick fix.
Updated by Jim Unroe 3 months ago
jose benedito santos josewest wrote:
fm trasceiver bf-777s
Please DO NOT attach the manufacturer's software. See the First things first! section of the How To Report Issues documentation page.
Jim KC9HI
Updated by Bernhard Hailer 3 months ago
- File deleted (
BF480.exe)