CHIRP

1. What are the steps required to reproduce the problem? What is the behavior you are seeing?

Radio has no frequencies in it. On the first Download From Radio, the img was blank as expected. Entered 2 frequencies into CHIRP and then Upload to Radio. After this completes, the channels are not available on the radio in Memory Mode (for Channels) by pressing the VFO button on the radio (it responds by audibly saying "error" in an Engligh robotic voice). After this, closing the img from CHIRP and executing a fresh Download From Radio displays the 3 frequencies in CHIRP which are not displaying/available on the radio which could mean that the values are storing on the radio although they are not attached to to the correct channels perhaps.

1. What is the behavior you were expecting? I would see the frequencies programmed into the respective radio channels.

2. Can you reproduce the problem all the time? Yes.

Think this bug is similar: https://chirp.danplanet.com/issues/334

Any help would be most appreciated, thank you in advance!

Tom

Details:¶

Radio: TYT TH-UV3R
Image and other details: http://www.409shop.com/409shop_product.php?id=108656
Manual: http://www.uv3r.com/images/TYT%20UV3R%20Manual.pdf
Software: CHIRP daily-20200603
FTDI cable in-use: https://www.valley-ent.com/store/tyt-ftdi-usb-radio-programming-cable-th-2r-th-uv3r-th-7800-th-9800.html
Mac OS X Driver: https://www.ftdichip.com/Support/Documents/InstallGuides.htm

Light Flash Activity on Radio (in case it is helpful):

1. Download From Radio: Red
2. Upload to Radio: Green