Bug #8217
closedIC-2300h Tx inhibit function
100%
Description
Unable to select "off" under duplex mode to turn on the Tx inhibit function
Updated by Bernhard Hailer over 4 years ago
- Priority changed from High to Normal
- Target version set to chirp-legacy
- Model affected changed from (All models) to Icom IC-2300H
Updated by Jim Unroe over 4 years ago
- Status changed from New to Feedback
Hi Z Z,
Not all radios support inhibiting TX. Are you able to inhibit TX using the radio's keypad or the Icom programming software for the IC-2300H? If you can, upload an image with 2 channels, one with TX enabled and another one identical to the first one except for TX being inhibited. If you can't do this from the keypad or Icom software, then CHIRP probably can't either.
Jim KC9HI
Updated by Bernhard Hailer about 4 years ago
According to the manual (page 44, "Other functions", this radio does support TX inhibit (menu, "TX").
Therefore, to help with your problem, we really need what Jim asked in the previous post: please attach in a response here an image with 2 channels, one with TX enabled and another one identical to the first one except for TX being inhibited.
Updated by Kosta A. almost 4 years ago
- Status changed from Feedback to In Progress
- Assignee set to Kosta A.
- % Done changed from 0 to 100
Updated by Kosta A. almost 4 years ago
- Status changed from In Progress to Resolved
Patch submitted for tx_inhibit, added to memory extras.
Updated by Kosta A. almost 4 years ago
- Status changed from Resolved to Closed
Applied in changeset commit:b3ddf88a9432.