Project

General

Profile

Actions

Bug #8511

closed

Cannot erase or edit 6+power on lines on UV-82

Added by Cort Chubko almost 4 years ago. Updated almost 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
12/02/2020
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Baofeng UV-82
Platform:
All
Debug Log:
I read the instructions above:

Description

Obtained new UV-82 Version N82302. Firmware is N822413. When I Push 6 and power on I get 190831M on the "6+ power on" line. I go into chirp, lastest build as of 12-01-2020,erase the 190831M and customize that with our units call and ID number go to load into the radio and it does not load into it. Only one line comes up in chirp on the firmware line (top one) and bottom line is blank. Would like to remove this info and customize this area of my radio. Any help apprecited.


Files

debug.log (103 KB) debug.log Cort Chubko, 12/02/2020 08:48 AM
Actions #1

Updated by Jim Unroe almost 4 years ago

  • Status changed from New to Feedback

This is not a CHIRP bug. Some of the more recent radios aren't allowing CHIRP access to the "aux" memory area where the firmware version and 6 + Power-On message is store. Sorry, but the limitation is your radio.

Jim KC9HI

Actions #2

Updated by Bernhard Hailer almost 4 years ago

  • Status changed from Feedback to Closed
  • Model affected changed from (All models) to Baofeng UV-82
  • Platform changed from Windows to All

Nothing Chirp can resolve.

Actions

Also available in: Atom PDF