CHIRP

Let's see if you can download an "image" from the radio. I have attached a test driver module that might do it.

Instructions for using the attached download test driver module.

1. Save the attached driver module to a convenient location. DO NOT download by right-clicking the link.
2. Enable Enable Developer Functions in the Help menu.
3. Chose Load Module in the File menu.
4. Locate and load the download test driver module that was saved in step 1.

CHIRP should now have a red background to indicate it is running with an external driver module. Try to download from your UV-9G. If successful, attach the CHIRP Radio Images (@.img@) file to this issue. *DO NOT TRY TO DO ANYTHING ELSE. If not successful, close CHIRP and attach the debug.log file to this issue and optionally describe the exact error message, if any.

Jim KC9HI

Success! img attached.

Bill,

Give this a try. I think it has all but one thing that I intended to add. The thing remaining has to do with the TX power levels. Would you answer the following question: Does menu 2 (TXP) have 2 choices (HIGH/LOW) or 3 choices (HIGH/MED/LOW)?

If you have some other so-called "waterproof" like radios (GT-3WP, UV-9R, BF-A58, Retevis RT6, etc), check them as well to make sure I didn't break the support for them.

Jim KC9HI

Patch submitted. Support will be in the next CHIRP daily build following acceptance.

Jim KC9HI

Support is now in CHIRP.

Jim KC9HI