LoadingTestModules » History » Version 11
Dan Smith, 06/30/2023 07:07 PM
| 1 | 1 | Dan Smith | # How to load test modules |
|---|---|---|---|
| 2 | |||
| 3 | 7 | Dan Smith | If a CHIRP developer tells you to load a module to test, follow these instructions. |
| 4 | 1 | Dan Smith | |
| 5 | 5 | Dan Smith | 1. Launch CHIRP. Make sure you are running the latest CHIRP-next build. If not, upgrade and start over. |
| 6 | 2. Click **Help** in the menu bar and select **Load module from issue** |
||
| 7 | 8 | Dan Smith | 3. Key in the Issue number which has the test module attached (see below) and click the **[OK]** button |
| 8 | 4 | Dan Smith | 4. Select the driver module listed and click the **[OK]** button. If there are multiple modules attached, select the one the developer wants you to test, usually the latest/last one. |
| 9 | 6 | Dan Smith | Your CHIRP is now running with the test driver module loaded. |
| 10 | 5. Test and report back your results. Be sure to **include a debug log** per the [[How_To_Report_Issues|instructions here]]. |
||
| 11 | 2 | Dan Smith | |
| 12 | 1 | Dan Smith | **Note:** An externally loaded driver module like this does not permanently change your CHIRP installation in any way. Once you close CHIRP you will have to re-load the driver module in order to have the added fixes or features again. |
| 13 | 8 | Dan Smith | |
| 14 | ## Finding the issue number |
||
| 15 | |||
| 16 | The issue number that you need to put into chirp is on the page where you are communicating with the developer. In the example below, the issue number is `10672`: |
||
| 17 | |||
| 18 | <img src="issue_screen.png" height="300"/> |
||
| 19 | 9 | Dan Smith | |
| 20 | You would enter this number into CHIRP in the following way: |
||
| 21 | |||
| 22 | 11 | Dan Smith | <img src="issue_entry.png" width="250"/> |