CHIRP

06/20/2021

05:33 AM CHIRP Bug #9145 (New): BF-888S - Radio refused to enter programming mode

Both of the BF-888S I own refuse to enter programming mode.
Both radios program just fine using BF-480 software and ... Geraint Stimson

04/29/2018

11:56 PM CHIRP Bug #5763 (Closed): Chirp offers unconnected serial ports

When attempting to read/write from a radio, the drop down box to select the serial port shows ports that are not curr... Geraint Stimson

06/27/2017

04:13 AM CHIRP Bug #4905: Baofeng UV-5R gives 'Unknown Response from Radio'

Tried again with new CP2102 based cable.
Chirp now works.
Although the Prolific PL2303 based cable would seem to be... Geraint Stimson

06/26/2017

11:23 AM CHIRP Bug #4949: Baofeng BF-888S "radio failed to enter programing mode"

Having the same issue.
Does 'baoclone' work? It does for me. I'm suspecting my Prolific based cable is the problem. Geraint Stimson

06/15/2017

12:27 AM CHIRP Bug #4905: Baofeng UV-5R gives 'Unknown Response from Radio'

Both Chirp and 'baoclone' appear to fail at the same point, just after the first block read.
Geraint Stimson

06/12/2017

02:06 PM CHIRP Bug #4905 (Closed): Baofeng UV-5R gives 'Unknown Response from Radio'

New Baofeng UV-5R gives 'Unknown Response from Radio' when attempting read before rebooting radio.
This radio appear... Geraint Stimson

06/08/2017

04:08 PM CHIRP Bug #4885: FDC460A EEPROM mismatch

Bang on Pavel, thanks for your work.
How much do I owe you for a beer? Geraint Stimson

06/07/2017

01:51 AM CHIRP Bug #4885: FDC460A EEPROM mismatch

Here's the .sin from the OEM software. Geraint Stimson

06/06/2017

03:04 PM CHIRP Bug #4885: FDC460A EEPROM mismatch

Hi Pavel,
Sterling work already!
Here's the debug.log
I'll get programming, but you may have to wait until morni... Geraint Stimson

12:18 AM CHIRP Bug #4885 (Closed): FDC460A EEPROM mismatch

Connecting to my rather old, and therefore I assume quite early (serial number less than 001750) model Feidaxin FDC46... Geraint Stimson