CHIRP

Wouxun KG-1000G Plus (KG-1000G+) Chirp Driver Beta 1.0

To load this driver:
Open Chirp -- Click on Help -- Enable Developer Functions
Click on File -- Load Module --- Select this driver from location where you saved the driver.

NOTE: USE ONLY ON THE KG-1000G+

This Driver will communicate with other radios like KG-UV980P, KG-1000G -- However the settings tab will likely blank out as the 1000G+ decodes settings differently.

Wouxun KG-1000G Plus (KG-1000G+) Chirp Driver Beta 2.0

NOTE: USE ONLY ON THE KG-1000G+
This Driver will communicate with other radios like KG-UV980P and KG-1000G -- but there are many settings that are coded differently and will cause problems.

Updates:

• Limit Upload to Radio routine to only write known channels/settings to memory - unknown memory locations are not written to radio
• Fix Voice, Ring, TOT, TOA settings to match the radio expectations and to maintain CPS compatibility.
• Update code to pass required CHIRP testing and PEP8 Format standards.

NOTE: There appears to be issues with the CPS writing incorrect values for some settings (Rpt-Dly (all values), Ring (10s)). So it is possible that when you write with CPS, Chirp may blank out the settings tab. At this point, the issue looks to be a CPS issue and not Chirp. Chirp and the Radio seem to be happy with each other.

To load this driver:
Open Chirp -- Click on Help -- Enable Developer Functions
Click on File -- Load Module --- Select this driver from location where you saved the driver.

Applied in changeset github|3594e1d0d4a7c3350f89ae37c1c9bf0354c67e90.