Bug #11199
closed
Unable to upload back to radio
Added by Ole Christian Eklund 9 months ago.
Updated 4 months ago.
Model affected:
Baofeng uv-6
I read the instructions above:
Yes
Description
My Baofeng uv-6 works fine, but when I download from the radio an make changes, im not able to upload back.
This happens every time I try.
CHIRP worked fine both ways from start, but suddenly I got this issue. All other models I have work fine.
I find it hard to see if any others have had the same problem.
Files
Please attach the CHIRP .img file you're trying to upload. Not a screenshot "image".
It looks to me like the driver is preventing you from uploading an image taken from one radio into another that has a different firmware. @Jim Unroe can confirm, but if so that means it's doing its job to help avoid a breakage.
I have to UV-6, both bought at the same time as a lot of two.
Dan Smith wrote in #note-3:
Please attach the CHIRP .img file you're trying to upload. Not a screenshot "image".
It looks to me like the driver is preventing you from uploading an image taken from one radio into another that has a different firmware. @Jim Unroe can confirm, but if so that means it's doing its job to help avoid a breakage.
Both radios worked fine both ways at the beginning. If there are issues with the driver, could you advice me for what to do?
Ole Christian Eklund wrote in #note-6:
Dan Smith wrote in #note-3:
Please attach the CHIRP .img file you're trying to upload. Not a screenshot "image".
It looks to me like the driver is preventing you from uploading an image taken from one radio into another that has a different firmware. @Jim Unroe can confirm, but if so that means it's doing its job to help avoid a breakage.
Both radios worked fine both ways at the beginning. If there are issues with the driver, could you advice me for what to do?
Hi again. I have still not found a solution for my issue. How can I resett my radio or repair the firmware?
You must not swap images between these 2 radios. You must download from each to create tabs. Then copy-and-past memories between the tabs. The upload each tab back into the same radio that it came from.
Hi
This is exactly what I do, but it will not work.
Vennlig hilsen
Ole Christian Eklund
+47 93068729
Sendt fra min iPhone
- juni 2024 kl. 03:19 skrev Jim Unroe redmine@chirpmyradio.com:
Ole Christian Eklund wrote in #note-9:
Hi
This is exactly what I do, but it will not work.
Vennlig hilsen
Ole Christian Eklund
+47 93068729
Sendt fra min iPhone
- juni 2024 kl. 03:19 skrev Jim Unroe redmine@chirpmyradio.com:
Are you able to download from a radio and immediately upload back into it?
I’m able to download and save in CHIRP, but not able to upload back.
Vennlig hilsen
Ole Christian Eklund
+47 93068729
Sendt fra min iPhone
- juni 2024 kl. 13:22 skrev Jim Unroe redmine@chirpmyradio.com:
I see the problem. I will have to see if I can come up with a solution.
Jim Unroe, would changing this condition in do_upload()
if has_dropped_byte and not aux_matched:
to this
if has_dropped_byte and (radio._aux_block and not aux_matched):
work?
Alexandre J. Raymond wrote in #note-13:
Jim Unroe, would changing this condition in do_upload()
if has_dropped_byte and not aux_matched:
to this
if has_dropped_byte and (radio._aux_block and not aux_matched):
work?
Yes. Something similar to that. I will attach at test driver later today with the 'fix'.
The attached test driver module should properly support the UV-6 without breaking support for the other models. I don't have a UV-6 available for testing (the original radios that were used were loaned to me has had to be returned). This needs to be tested by those wiht physical access to the radio. How to test: LoadingTestModules
Thank you so much.
Best regards
Ole Christian Eklund
+47 93068729
Sendt fra min iPhone
- juni 2024 kl. 18:36 skrev Jim Unroe redmine@chirpmyradio.com:
I will get back to you as soon as I have tested this.
Vennlig hilsen
Ole Christian Eklund
+47 93068729
Sendt fra min iPhone
- juni 2024 kl. 10:25 skrev Ole Christian Eklund oceklund@online.no:
Thank you so much.
Best regards
Ole Christian Eklund
+47 93068729
Sendt fra min iPhone
- juni 2024 kl. 18:36 skrev Jim Unroe redmine@chirpmyradio.com:
Many thanks for your help. It worked.
But do I understand right that I have to upload the driver everytime I start CHIRP?
OR only when I want to do changes to the UV-6?
Med vennlig hilsen
Ole Christian Eklund
+47 93068729
Fra: Jim Unroe redmine@chirpmyradio.com
Sendt: fredag 21. juni 2024 21.36
Til: undisclosed-recipients:
Emne: [CHIRP - Bug #11199] Unable to upload back to radio
- Assignee set to Jim Unroe
- Target version set to chirp-py3
Ole Christian Eklund wrote in #note-18:
But do I understand right that I have to upload the driver everytime I start CHIRP?
OR only when I want to do changes to the UV-6?
Every time you start CHIRP but only when you want to program your UV-6.
At least until the patch gets submitted and becomes available in a future build.
Now that I have confirmation that it works, I will try to get the changes submitted.
- Status changed from New to Closed
- % Done changed from 0 to 100
With the new CHIRP-update, everything is now working properly.
Thank you for all the help.
Best wishes
Ole Christian Eklund
+47 93068729
Sendt fra min iPhone
- juni 2024 kl. 01:06 skrev Jim Unroe redmine@chirpmyradio.com:
Also available in: Atom
PDF
