CHIRP

Chirp version 20150321. This software was loaded on a PC operating under Windows 7.

I thought I would chime in on this. I also ran into the exact same issue. I tried a slightly older build of chirp with the same results. So, I went all the way back to build 20150118 just as a random pick, and the issue went away and I was able to program again. Thanks for all the effort that goes into this software.

I had the same problem chirp 20150325 but downloaded and ran uv5r.py and has worked loading on my 2 week old UV82l

I encountered the same problem with windows chirp 20150325 and chirp 20150405. For some reason, I did manage to get one successful download from the radio. I have tried to repeat my steps but have not been able to repeat it. I have no trouble uploading to the radio.

+1 for this. I can't get it to download at all with CHIRP daily-20150622 on Linux.

(process:17921): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.

(chirpw:17921): IBUS-WARNING **: The owner of /home/lfarrar/.config/ibus/bus is not root!
ERROR: Radio did not respond
ERROR: -- Exception: --
ERROR: Traceback (most recent call last):
File "/usr/lib/pymodules/python2.7/chirp/ui/clone.py", line 238, in run
self.__radio.sync_in()
File "/usr/lib/pymodules/python2.7/chirp/drivers/uv5r.py", line 701, in sync_in
self._mmap = _do_download(self)
File "/usr/lib/pymodules/python2.7/chirp/drivers/uv5r.py", line 504, in _do_download
data = _ident_radio(radio)
File "/usr/lib/pymodules/python2.7/chirp/drivers/uv5r.py", line 499, in _ident_radio
raise error
RadioError: Radio did not respond

ERROR: ----------------
ERROR: Clone failed: Radio did not respond
ERROR: --- Exception Dialog: Radio did not respond ---
ERROR: None

ERROR: ----------------------------