New Model #2599
openANYTONE NSTIG-8R
0%
Description
Please add the add ANYTONE NSTIG-8R to the supported devices. I have an .IMG file for a BAOFENG, but am having a heck of a time figuring out how to manually type in the 100+ frequencies into the OEM software for the NSTIG-8R. None of the options match! Basically I have a very nice looking paperweight. Please help.
Related issues
Updated by Ron Kroetz over 8 years ago
Any word on progress here? Are all the Anytone 8R variants the same firmware? I'll volunteer to test on my NSTIG-8R
Updated by Tim Smith about 7 years ago
- Subject changed from Add the ANYTONE NSTIG-8R to ANYTONE NSTIG-8R
Updated by Kyle Keen almost 7 years ago
I've started poking around anytone_ht.py to add support for the NSTIG8R. I would consider it halfway done at this point, with two one-line tweaks:
_file_ident = "INSTIG8R" _ranges = [(0x0000, 0x4000),]
This will allow you to download an image, edit the memories/settings and re-upload it.
The second half is going to be harder. Re-using the TERMIN8R code means there are many details that need to be corrected for various missing features. And the architecture of the driver does not make this easy since many of the option fields are hard-coded.
Not sure where to go with this next?
Updated by Kyle Keen almost 7 years ago
My work-in-progress of adding support can be found at http://kmkeen.com/tmp/anytone_ht.py.txt
Updated by Bernhard Hailer about 4 years ago
- Status changed from New to Feedback
- Priority changed from Urgent to Normal
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
Kyle, you should review the Wiki article "Developers" and sign up on the corresponding mailing list.