Bug #5293
openKG-UV8D Bug: When uploading to the radio, the R-CTC is set to some non-OFF value, silencing all channels
0%
Description
Tried with a much earlier version of Chirp (2015-12-23) and it works fine. I suspect it has something to do with how selectivity options are displayed in the interface and then serialized.
Files
Updated by Mike Swiech over 5 years ago
This does not appear to be fixed yet. I noticed no receive when programming KG-UV8D. If I go to R-CTC in the radio menu and just look at the status of the freq. "OFF" and then exit the menu it works. However doing that for a lot of memory freq, can be a pain. When I down load the radio into the Wouxun supplied programming software the receive and transmit CTC columns are filled with and assortment of characters. The string begins with DN followed by 4 or 5 numbers or just a string of numbers. Changing those characters to NONE from the receive ctc pull down menu and uploading to the radio resolves the issue. However, the transmit ctc column will either change from what's described in the rec ctc column to a ctc tone designation such as 88.5, 107.9, etc. or will remain unchanged but the radio still functions.
Updated by Bernhard Hailer over 4 years ago
- Target version set to chirp-legacy
- Model affected changed from KG-UV8D to Wouxun KG-UV8D
- Platform changed from Windows to All
Updated by Mel Terechenok 10 months ago
Try this test driver.
I believe it corrects all the issues with the UV8D Tones.