Project

General

Profile

Actions

Bug #6793

closed

Frequency step issue with Radioddity R2 (related to 6745)

Added by Bruce Albert over 5 years ago. Updated almost 5 years ago.

Status:
Rejected
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
05/15/2019
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
R2
Platform:
Linux
Debug Log:
I read the instructions above:

Description

New Radioddity R2. I was able to download the default config from the radio. I was unable to import the FRS config file, it just didn't work. I used the Radioddity software to tprogram the radio for FRS channels 1-14 with no CTCSS tones, and channels 15 and 16 with tones on both TX and RX. Works as expected. When I read the radio with CHIRP, it does not read the TX tone, but leaves it at 88.5; it does read the TSQL tone properly. When I try to change the TX tone, it gives me an error that says:
Error setting Memory:Frequency requires 12.50kHz step

This may be related to #6745, but a different message.


Files

radioddity_r2.py (18.7 KB) radioddity_r2.py Lucent W, 05/17/2019 02:59 AM
radioddity_r2_tuning_steps.patch (932 Bytes) radioddity_r2_tuning_steps.patch Tony Fuller, 08/14/2019 03:41 PM
Actions

Also available in: Atom PDF