Bug #6925: Yaesu FT-4XR Skip Function is Inverted - CHIRP

Actions

Copy link

Bug #6925

closed

Yaesu FT-4XR Skip Function is Inverted

Added by Donald Bryant almost 5 years ago. Updated over 3 years ago.

Status:

Closed

Priority:

Normal

Assignee:

Bernhard Hailer

Category:

Target version:

chirp-legacy

Start date:

07/20/2019

Due date:

% Done:

100%

Estimated time:

Chirp Version:

daily

Model affected:

Yaesu FT-4X, FT-4V, FT-25, FT-65

Platform:

All

Debug Log:

I read the instructions above:

Description

The slip function is inverted. an S means its in the scan list on this model and is opposite of prior models. Just confirmed this. Listed before can't enter any out of ham band channels.

Files

ft4.py (51.2 KB) ft4.py

Corrected driver for Yaesu FT4

Bernhard Hailer, 04/28/2020 08:15 PM

Related issues

Actions

Copy link

Updated by Bernhard Hailer about 4 years ago

Status changed from New to In Progress
Assignee set to Bernhard Hailer
Platform changed from Windows to All

Please let me know if this is still an issue. I can look into it.

Actions

Copy link

Updated by John Henderson about 4 years ago

Bernhard Hailer wrote:

Please let me know if this is still an issue. I can look into it.

This is still an issue as of chirp-daily-20200227.

Actions

Copy link

Updated by Bernhard Hailer about 4 years ago

Target version set to chirp-legacy

Ok, noted - I will look into it :-)

Actions

Copy link

Updated by Bernhard Hailer almost 4 years ago

File ft4.py ft4.py added
% Done changed from 0 to 90

Donald or John,
could you do me a favor and test my fix? This is how you can do that:

enable developer mode: help -> check enable developer functions,
load this module: file -> load module, point to the ft4.py you downloaded,
perform radio communication as usual,
test whether the inversion problem is gone.
Let me know. Thanks!

Actions

Copy link

Updated by Gordon Daugherty almost 4 years ago

Hello. I'm not Donald or John but I just ran into this issue, found this ticket, and followed your instructions. Your fix does appear to do the trick.

After downloading and loading your module the channels that were being erroneously marked with 'SKIP' now accurately reflect that they're set to 'SKIP' in the Chirp UI. I used Chirp's slick multi-select / bulk property update function (big thanks to whoever implemented that!) to switch them all from 'SKIP' to blank, uploaded to my radio, and now I'm able to scan my memory channels.

Thank you!

Actions

Copy link