Bug #8321
closedIncorrect tone values for ANI/PTT-ID
100%
Description
The DTMF tones for ANI and PTT-ID are incorrect for my Baofeng UV-5R (recently purchased from Amazon in Sep. 2020).
The values programmed in CHIRP were sending the wrong tones (but I can produce all tones correctly pressing the keypad manually during transmit).
Entering the following values into the ANI and PTT-ID fields produced the following:
- programmed "*", output DTMF B
- programmed "#", output DTMF C
- programmed "A", output DTMF D
- programmed "B", output DTMF *
- programmed "C", output DTMF #
- programmed "D", output 800Hz tone
Using the Developer Functions (View->Developer->Show raw memories) I was able to figure out the correct values and tones for my radio:
- 0x0A = DTMF A (Menu)
- 0x0B = DTMF B (Up)
- 0x0C = DTMF C (Down)
- 0x0D = DTMF D (Exit)
- 0x0E = DTMF *
- 0x0F = DTMF #
- 0x10 = 800Hz (PTT + MONI)
- 0x11 = 1000Hz (PTT + CALL)
- 0x12 = 1450Hz (PTT + VFO/MR)
- 0x13 = 1750Hz (PTT + A/B)
- 0x14 = 2100Hz (PTT + BAND)
Build: CHIRP daily-20200909
OS: Windows 10 Home 1909 (64-bit)
Programming Cable: Baofeng-branded, identifies as CH340 (VID: 1A86, PID: 7523, REV: 0263)
Radio: Baofeng UV-5R (no special branding or model designation, just the standard dual-band, dual-power model)
Firmware: HN5RV011 (151123H)
Power+6: 190831M
Power+3: Ver BFB298
Files
Related issues