Project

General

Profile

Actions

Bug #8321

closed

Incorrect tone values for ANI/PTT-ID

Added by Dan Allongo about 4 years ago. Updated almost 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
10/12/2020
Due date:
% Done:

100%

Estimated time:
Chirp Version:
daily
Model affected:
UV-5R
Platform:
All
Debug Log:
I read the instructions above:

Description

The DTMF tones for ANI and PTT-ID are incorrect for my Baofeng UV-5R (recently purchased from Amazon in Sep. 2020).
The values programmed in CHIRP were sending the wrong tones (but I can produce all tones correctly pressing the keypad manually during transmit).

Entering the following values into the ANI and PTT-ID fields produced the following:

  • programmed "*", output DTMF B
  • programmed "#", output DTMF C
  • programmed "A", output DTMF D
  • programmed "B", output DTMF *
  • programmed "C", output DTMF #
  • programmed "D", output 800Hz tone

Using the Developer Functions (View->Developer->Show raw memories) I was able to figure out the correct values and tones for my radio:

  • 0x0A = DTMF A (Menu)
  • 0x0B = DTMF B (Up)
  • 0x0C = DTMF C (Down)
  • 0x0D = DTMF D (Exit)
  • 0x0E = DTMF *
  • 0x0F = DTMF #
  • 0x10 = 800Hz (PTT + MONI)
  • 0x11 = 1000Hz (PTT + CALL)
  • 0x12 = 1450Hz (PTT + VFO/MR)
  • 0x13 = 1750Hz (PTT + A/B)
  • 0x14 = 2100Hz (PTT + BAND)

Build: CHIRP daily-20200909
OS: Windows 10 Home 1909 (64-bit)
Programming Cable: Baofeng-branded, identifies as CH340 (VID: 1A86, PID: 7523, REV: 0263)

Radio: Baofeng UV-5R (no special branding or model designation, just the standard dual-band, dual-power model)
Firmware: HN5RV011 (151123H)
Power+6: 190831M
Power+3: Ver BFB298


Files

uv5r_fix_for_hn5rv_firmware.py (63.6 KB) uv5r_fix_for_hn5rv_firmware.py Jim Unroe, 10/16/2020 07:11 PM

Related issues 1 (0 open1 closed)

Related to Bug #3351: BUG IN CHIRP FOR BAOFENG UV-5R AND UV-5R2+ HT'SClosed02/18/2016

Actions
Actions

Also available in: Atom PDF