CHIRP

I recently purchased a UV-25X2 unit and had it programmed with different repeaters that I use often. It was working great for about a day while I was using it for line of sight transmissions around the farm when out of the blue it wouldn’t let me transmit at all. When I go to key the Mic the channel or frequency that I have selected will show
TX-STOP!.After flashing the original configuration to the radio the radio now displays “KILLED” in the bottom header where it typically reads UV-25X2.
I tried flashing over the factory configuration and it no longer reads “KILLED!” But will still only show “TX-STOP!” When attempting to transmit
I flashed the radio with the provided programming from trouble shooting support and tested the RX capabilities and it works flawlessly but when trying to TX it still will read “TX-STOP!”. When flashed with my desired programming it reads “KILLED” in the bottom bar and will neither RX or TX. When flashed back to provided programming it goes bat to being able to RX but not TX.
attached are the different programming that i tried